Table of Contents
Advertisement
2–6
Installation Instructions
Controls & Indicators
Publication 6151-UM001C-EN-P
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
For a DC unit, connect +VDC to 24VDC screw terminal
Common to -VDC screw terminal, and earth ground to GND
screw terminal.
4. Connect the 53.3 cm (21") male to female power extension cable
supplied with the Industrial Computer. This cable runs from the
switched outlet
on the rear of the computer to the AC power
connector
for the monitor.
5. Connect the plug end of the AC power cord to the mains power
supply.
This is an example of one possible setup for the 6151 Industrial
Computers. The callouts are described in Table A.
Figure 3
Back View of One Setup for Bulletin 6151 Industrial
Computer configured for AC power
, DC
Advertisement
Table of Contents
