Related Manuals for Allen-Bradley 6181F
Summary of Contents for Allen-Bradley 6181F
-
Page 1: Table Of Contents
Installation Instructions Industrial Integrated Display Computers Catalog Numbers 6181F, 6181P Topic Page Important User Information European Union Directive Compliance Product Options Operating System Multilingual User Interface CD Pack Mounting Clearances Install the Computer Mount the Display Computer in a Panel... -
Page 2: Important User Information
2 Industrial Integrated Display Computers Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation® sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. -
Page 3: European Union Directive Compliance
Industrial Integrated Display Computers 3 Environment and Enclosure Information Review the information on enclosures and environments before installing the product. ATTENTION: Environment and Enclosure This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 m (6561 ft) without derating. -
Page 4: Product Options
1200P 12.1 in. XP Pro SP3 Performance 6181P-12TPXP 6181P-12TPW7 7 Pro 32 bit 6181P-12TPXPDC XP Pro SP3 6181P-12TPW7DC 7 Pro 32 bit 6181F-12TPXP XP Pro SP3 6181F-12TPWE Std 2009 (1)(2) 6181F-12TPXPDC XP Pro SP3 (1)(2) 6181F-12TPWEDC Std 2009 6181P-12NSXP XP Pro SP3... -
Page 5: Operating System
17 in. XP Pro SP3 Performance 6181P-17TPXP XP Pro SP3 6181P-17TPW7 7 Pro 32 bit 6181P-17TPXPDC XP Pro SP3 6181P-17TPW7DC 7 Pro 32 bit 6181F-17TPXP XP Pro SP3 6181F-17TPWE Std 2009 (1)(2) 6181F-17TPXPDC XP Pro SP3 (1)(2) 6181F-17TPWEDC Std 2009 6181F-17TPXPSS... -
Page 6: Multilingual User Interface Cd Pack
6 Industrial Integrated Display Computers Computers with Windows Embedded Standard 2009 include a utility for configuring the Enhanced Write Filter (EWF) and Hibernate Once Restore Many (HORM) features. Refer to the EWF/HORM Configuration Utility Technical Data, publication 6000-TD003, for instructions. To obtain the original factory image on bootable external-recovery media, contact your local technical support center. - Page 7 Industrial Integrated Display Computers 7 Installation Guidelines Follow these guidelines to make sure your product provides safe and reliable service: • The installation site must have sufficient power. ATTENTION: To maintain an electrically safe installation, the AC powered products must be plugged into a grounded outlet.
-
Page 8: Mounting Clearances
8 Industrial Integrated Display Computers Mounting Clearances Because of self-heating, do not operate the computer in an enclosure using minimum IMPORTANT clearances unless adequate ventilation or other cooling methods are used to lower the temperature within the enclosure. Item Description Value 50 mm (2 in.) Left (for airflow) - Page 9 Industrial Integrated Display Computers 9 1200P Integrated Display Computer - Performance 320 (12.60) 115 (4.5) 115 (4.5) 124 (4.90) 99.8 (3.93) 349 (13.74) 14.5 (0.57) (10.98) (9.84) 1200P Integrated Display Computer - Standard 320 (12.60) 99.4 (3.91) 90.35 (3.56) 115 (4.5) 115 (4.5) (3.36) 349 (13.74)
- Page 10 10 Industrial Integrated Display Computers 1500P Integrated Display Computer - Performance 31.8 (1.25) 320 (12.60) 31.8 (1.25) (3.94) 28 (1.10) 145 (5.7) 145 (5.7) 410 (16.14) 14.5 (0.57) 15.8 (0.62) (12.16) (9.88) NOTE: 1500P models with stainless steel bezels do not have the front USB port shown at right. 15.8 (0.62) 1500P Integrated Display Computer - Standard 32.55 (1.28)
- Page 11 Industrial Integrated Display Computers 11 1700P Integrated Display Computers - Performance 51 (2.0) 320 (12.56) 51 (2.0) (3.94) 145 (5.7) 145 (5.7) 28 (1.10) 452 (17.80) 14.5 (0.57) 38 (1.51) (9.89) (14.01) NOTE: 1700P models with stainless steel bezels do not have the front USB port shown at right. 38 (1.51) 1700P Integrated Display Computer - Standard 51 (2.0)
-
Page 12: Install The Computer
12 Industrial Integrated Display Computers Install the Computer The computers support the following mounting options: • Panel mount • Wall mount (for non-display computers) Panel Mounting Guidelines Observe these guidelines when installing the unit in a panel: • Remove all electrical power from the panel before making the cutout. •... -
Page 13: Mount The Display Computer In A Panel
Industrial Integrated Display Computers 13 Mount the Display Computer in a Panel Mounting clips secure the display computer to the panel. The number of clips varies by model. Computer Model Number of Clips All display models with aluminum bezel and 1500P display with stainless steel bezel 1700P display with stainless steel bezel Cat. -
Page 14: Connect Peripherals
14 Industrial Integrated Display Computers Mount the Non-display Computer on a Wall Four mounting screws secure the non-display computers to a wall. Follow these steps to mount a non-display computer. 1. Verify the power is 335 (13.20) disconnected. 2. Mount the computer to a wall by using four M5 pan head screws... - Page 15 Industrial Integrated Display Computers 15 Performance and Non-display Models Bottom View (1500P model shown) Item Component Item Component PS/2 mouse port Functional ground screw PS/2 keyboard port USB ports, 4 Parallel port CompactFlash Type II card slot Ethernet ports (RJ 45), 2 Serial COM ports, 2 DVI-I port...
-
Page 16: Apply Power
16 Industrial Integrated Display Computers Apply Power The computer connects to either a 100…240V AC or 18…32V DC power source, depending on the model. SHOCK HAZARD: Connect the AC power cord or the DC ground connection to a power source with an earth ground. - Page 17 Industrial Integrated Display Computers 17 Connect AC Power to Standard Computers Follow these steps to connect AC power to the standard computers. 1. Connect the power cord to the AC power input (1), and secure it in place with the retention clip (2).
- Page 18 18 Industrial Integrated Display Computers The power supply is internally protected against reverse polarity. ATTENTION: Use a SELV isolated and ungrounded power supply as input power to the computer. This power source provides protection so the voltage between the conductors and functional earth/protective earth does not exceed a safe value under normal and single fault conditions.
-
Page 19: Connect To A Network
Industrial Integrated Display Computers 19 Connect to a Network The computers have 2 Gb LAN ports. The computers connect to an Ethernet network using CAT5 or CAT5E twisted-pair Ethernet cabling with RJ-45 connectors. Performance and Non-display Computer Standard Computer To prevent performance degradation of Ethernet communication, do not subject the computer IMPORTANT or cables to extreme radiation or conducted high-frequency noise. -
Page 20: Ship Or Transport The Product
20 Industrial Integrated Display Computers If your computer does not display the correct time and date, replace the battery. ATTENTION: Replace the battery with a specially-packaged replacement part from Allen-Bradley. Use of another battery may present a risk of fire or explosion. -
Page 21: Specifications
Industrial Integrated Display Computers 21 Specifications Electrical Specifications Attribute Value Performance and non-display, AC Input voltage, AC 100…240V AC, autoranging Line frequency 47…63 Hz Power consumption, AC 110VA (0.95 A @ 100V rms, 0.46 A @ 240V rms) Performance and non-display, DC Input voltage, DC 18…32V DC Power consumption, DC... -
Page 22: Certifications
0.006 in. p-p, (10…57 Hz); 1 g peak, (57…640 Hz) 6181P 0.012 in. p-p, (10…57 Hz); 2 g peak, (57…640 Hz) 6181F Vibration, nonoperating 0.012 in. p-p, (10…57 Hz); 2 g peak, (57…640 Hz) (1) The optical disc drive is considered a maintenance device. Therefore, do not operate computers with an optical disk drive in temperatures above 45 °C (113 °F). -
Page 23: Additional Resources
Hibernate Once Restore Many (HORM) features for computers with the Windows Embedded Standard 2009 operating system. You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of technical documentation, contact your local Allen-Bradley® distributor or Rockwell Automation sales representative. Rockwell Automation Publication 6181P-IN010D-EN-P - April 2012... - Page 24 Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/. Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.