Ricoh PRO C900 Operating Instructions Manual page 57

Enter the device certificate contents issued by the certificate authority.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The network administrator can log on.
Enter the login user name and password.
4. Click [Configuration], and then click [Device Certificate] under "Security".
The Device Certificate page appears.
5. Check the radio button next to the number of the certificate you want to install.
6. Click [Install].
7. Enter the contents of the device certificate.
8. In the "Certificate Request" box, enter the contents of the device certificate received from
the certificate authority.
9. Click [OK].
"Installed" appears under "Certificate Status" to show that a device certificate for the machine has
been installed.
10. Click [Logout].
Windows Authentication
55
2