Specifications - Phcbi MDF-1156 Series Operating Instructions Manual

SPECIFICATIONS

Product name
External dimensions
Internal dimensions
Effective capacity
Exterior
Interior
Door
Insulation
Compressor
Condenser
Evaporator
Refrigerant
Temperature controller
Temperature display
Sensor
Alarm
Battery
Temperature recorder
Backup cooling kit
Accessories
Weight
Option
Note: Design or specifications will be subject to change without notice.
The battery for power failure alarm is an article for consumption. It is recommended that the
battery will be replaced about every 3 years. Contact our sales representative or agent at the time
of replacement of the battery for recycling.
Refer to the updated catalog when ordering an optional component.
Ultra-Low Temperature Freezer
MDF-1156
Fin and tube type (high stage side), Shell and tube type (low stage side)
R-407D (high stage side), HFC mixed refrigerant (low stage side)
For power failure alarm; Nickel-metal-hydride battery, DC 6 V, 650 mAh, Auto-recharge
For backup cooling kit; Lead storage battery, DC 6 V, 4 Ah
-----
-----
1 set of key, 2 rubber caps, 1 inner lid, 1 scraper
-----
265 kg
Ultra-Low Temperature Freezer
W1400 mm x D800 mm x H945 mm
W500 mm x D450 mm x H572 mm
128 L
Painted steel
Aluminum plate
Painted steel
Rigid polyurethane foamed-in place
Hermetic type, 1100 W x 2
Tube on sheet type
Microprocessor control system
Digital display
Platinum resistance (Pt 100 Ω)
buzzer, lamp, remote alarm contact
Recording chart (for 2 months)
1 connect tube for backup cooling kit
Storage case (MDF-49SC)
29
MDF-1156ATN
Dry cell driven
Liquid N
2
6 recording paper, 1 dry cell
2 ink pens (cartridge)
272 kg