Start-Up Of Unit - Phcbi MDF-1156 Series Operating Instructions Manual

START-UP OF UNIT

Follow the procedures for the initial and consequent operations of the unit.
1. Make sure that all the switches on the control panel, such as the power supply switch, battery switch,
backup switch (ATN type) and remote alarm switch are off.
2. Connect the power cord to the dedicated outlet having appropriate rating with the chamber empty, and
turn on the power supply switch on the freezer.
3. Turn on the battery switch.
4. The audible alarm may be activated. In this case, press the alarm buzzer stop key (BUZZER) to
silence the alarm.
5. Set the desired chamber temperature. See page 14 for the chamber temperature setting.
6. Check that the chamber temperature reaches the desired temperature.
7. Turn on the backup switch (ATN type) and remote alarm switch.
8. Make sure that the alarm lamp blinks and the buzzer sounds by pressing the alarm test key (ALARM).
9. After confirming the above, you can put articles into the freezer chamber in a small batch to prevent the
temperature rise.
13