To Empty Scrap Basket; To Clean Unit - InSinkErator PowerRinse PRP Series Installation, Care And Use Manual

TO EMPTY SCRAP BASKET

1
Ensure unit is turned off by pressing the STOP button
on the control.
2
Cover
Remove cover.
3
Scrap
Basket
Remove scrap basket and dump waste into appropriate
trash or compost receptacle.
Operating Instructions

TO CLEAN UNIT

It is recommended that unit be cleaned daily at end of
shift, and as needed throughout the day.
1
Indicator Light
Stop
Turn off unit and empty scrap basket (see above
instructions). Pull overflow tube to drain water inside
waste collector tank.
Waste 2
Collector
Tray
DO NOT use corrosive chemicals for cleaning.
Waste
Collector
Tank
13
Rinse cover, scrap basket, tray, and tank
interior. Scrap basket may be run through
dishwasher.
Overflow
Tube
Waste
Collector
Tank