Sfp Port Led; Management Ethernet Port Leds; Fan Tray Alarm Leds - H3C S6850 Series Installation Manual

SFP port LED

Table 38 SFP port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off

Management Ethernet port LEDs

The switch provides two status LEDs LINK and ACT for the copper management Ethernet port and
one double-color LED LINK/ACT for the fiber management Ethernet port.
Table 39 Copper management Ethernet port LED description
LED mark
LINK
ACT
Table 40 Fiber management Ethernet port LED description
LED mark
LINK/ACT

Fan tray alarm LEDs

The LSWM1FANSA, LSWM1FANSAB, LSWM1BFANSC, and LSWM1BFANSCB fan trays each
provide an alarm LED.
Table 41 Description for the alarm LEDs on the fan trays
Status
On
Off
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 100 Mbps.
The port is sending or receiving data at 100 Mbps.
No transceiver module or cable has been installed or no link is present on the port.
Status Description
Off No link is present on the port
Steady green The port is operating at 10/100/1000 Mbps.
Off The port is not receiving or sending data.
Flashing yellow The port is sending or receiving data.
Status Description
Off No link is present on the port.
Steady green The port is operating at 1000 Mbps.
Flashing green The port is receiving or sending data at 1000 Mbps.
Steady yellow The port is operating at 100 Mbps.
Flashing yellow The port is receiving or sending data at 100 Mbps.
Description
The fan tray is faulty.
The fan tray is operating correctly or no power is being input.
73