Rear turn signal lights
■
Open the trunk, and remove the
1
cover.
Remove the 2 screws.
2
Push and pull the light unit toward
3
the rear of the vehicle as shown in
the illustration to remove it.
Apply protective tape to the periph-
eral of the light unit installation sur-
face on the vehicle body, such as the
rear bumper, to protect the vehicle
from damage.
Pushing on the portion A in the illus-
tration toward the rear of the vehicle
will make disengagement of the tabs
easier.
Turn the bulb base counterclock-
4
wise.
IS350 AWD/IS350/IS300 AWD/IS300_U
7-3. Do-it-yourself maintenance
509
7