Lexus IS350 AWD Owner's Manual page 443

Programming HomeLink
■
Steps through
1
indicator light will stop flashing and programming will not be able to be com-
pleted.
Press and release the HomeLink
1
that the HomeLink
Point the remote control transmit-
2
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
in view while programming.
Program a device.
3
Programming a device other than an entry gate (for U.S.A. owners)

Press and hold the handheld transmitter button until the HomeLink
cator light changes from slowly flashing orange to rapidly flashing green
(rolling code) or continuously lit green (fixed code), then release the but-
ton.
Programming an entry gate (for U.S.A. owners)/Programming a device

in the Canadian market
Press and release the remote control transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
4
and observing the indicator light:
Indicator light illuminates: Programming of a fixed code device has com-
●
pleted. The garage door or other device should operate when a Home-
®
Link
IS350 AWD/IS350/IS300 AWD/IS300_U
6-5. Using the other interior features
®
must be performed within 60 seconds, otherwise the
3
®
®
indicator light flashes (orange).
®
buttons.
®
indicator light
®
operation by pressing the newly programmed button
button is pressed and released.
button you want to program and check
®
indicator light changes from slowly
443
6
®
indi-