Lexus IS350 AWD Owner's Manual page 444

444
6-5. Using the other interior features
Indicator light flashes rapidly: The garage door opener motor or other
●
device is equipped with a rolling code. To complete programming, firmly
press and hold the HomeLink
If the garage door or other device does not operate, proceed to "Pro-
●
gramming a rolling code system".
Repeat the steps above to program another device for any of the remaining
5
HomeLink
Programming a rolling code system
■
2 or more people may be necessary to complete rolling code programming.
Locate the "Learn" or "Smart"
1
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by man-
ufacturer. Refer to the owner's man-
ual supplied with the garage door
opener motor for details.
Press and release the "Learn" or
2
"Smart" button.
Perform
after performing
Press and hold the desired
3
HomeLink
vehicle) for 2 seconds and
release it. Repeat this sequence
(press/hold/release) up to 3
times to complete programming.
If the garage door opener motor
operates when the HomeLink
button is pressed, the garage
door opener motor recognizes
the HomeLink
IS350 AWD/IS350/IS300 AWD/IS300_U
®
®
buttons.
within 30 seconds
3
.
2
®
button (inside the
®
®
signal.
button for 2 seconds then release it.