Page 1
TABLE OF CONTENTS Adjusting and operating features such as door locks, mir- Before driving rors, and steering column. When driving Driving, stopping and safe-driving information. Air conditioning and audio systems, as well as other interior Interior features features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it-your- and care...
TABLE OF CONTENTS Index For vehicles with a navigation system, refer to the “Navigation System Owner’ s Manual” for information regarding the equipment listed below. • Navigation system • Audio/video system • Air conditioning • Rear window and outside rear view •...
Page 3
2-5. Driving information When driving Cargo and luggage...... 210 Vehicle load limits......213 2-1. Driving procedures Winter driving tips ......214 Trailer towing........216 Driving the vehicle......126 Dinghy towing ......... 217 Engine (ignition) switch ....134 Automatic transmission....138 Turn signal lever ......
Page 4
TABLE OF CONTENTS Index ® 3-3. Using the Bluetooth 3-6. Using the storage features audio system List of storage features....334 ® • Glove box ........335 Bluetooth audio system ..280 • Console box....... 335 ® Using the Bluetooth audio •...
Page 5
Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers ....454 the vehicle exterior....378 If your vehicle needs to be Cleaning and protecting towed ..........455 the vehicle interior..... 381 If you think something is wrong ..........
Page 6
TABLE OF CONTENTS Index Vehicle specifications Index 6-1. Specifications Abbreviation list........560 Maintenance data (fuel, oil level, etc.)...... 512 Alphabetical index ......562 Fuel information......523 Tire information......526 What to do if.......... 573 6-2. Customization Customizable features....538 6-3.
Page 8
Pictorial index Exterior Windshield wipers P. 168 Moon roof P. 79 Outside rear view mirrors P. 74 Hood P. 393 Side marker lights P. 162 Headlights (low/high beam) P. 162 Front fog lights P. 166 Front turn signal lights P.
Page 9
Rear window defogger P. 228 Side marker lights P. 162 Tail lights P. 162 Doors Trunk P. 46 P. 50 Tires ●Replacement P. 487 Rear turn signal lights ●Inflation pressure P. 521 P. 147 ●Information P. 526 Fuel filler door P.
Page 10
Pictorial index Interior AUX port P. 275 Seat belts USB port P. 64 P. 256, 264 Bottle holders/door pockets P. 339 Head restraints P. 61 Floor mats P. 355 Power window switches P. 76 SRS driver airbag P. 94 SRS knee airbags P.
Page 11
Anti-glare inside rear view mirror P. 72 Overhead console P. 336 Personal lights P. 332 Moon roof switches P. 79 Interior lights P. 332 Personal lights P. 332 Interior lights P. 332 “SOS” button P. 369 Coat hooks P.
Page 12
Pictorial index Interior Inside door lock buttons P. 46 Driving position memory switches P. 55 Seat position memory switches P. 59 Door lock switches P. 46 Outside rear view mirror switches P. 74 Window lock switch P. 76 Power window switches P.
Page 13
Automatic transmission shift lever P. 138 Seat heater switches P. 349 Shift lock override button P. 497 Cigarette lighter P. 347 Ashtray P. 346 Auxiliary box P. 339 : If equipped...
Page 14
Pictorial index Instrument panel Headlight switch P. 162 Turn signal lever P. 147 Fog light switch P. 166 Paddle shift switches P. 141, 143 Multi-information display P. 157 Gauges and meters P. 150 Windshield wiper and washer switch P. 168 Engine (ignition) switch P.
Without navigation system Air conditioning system P. 220 Rear window and out- side rear view mirror Audio defoggers P. 228 system P. 230 Clock Security indicator P. 342 P. 86, 88 Emergency flasher switch P. 454...
Page 16
Pictorial index Instrument panel With navigation system Rear window and outside rear view mirror defoggers Navigation Security indicator system P. 86, 88 Air conditioning Clock P. 342 system Audio system Emergency flasher switch P. 454...
Page 17
Audio remote control switches P. 277 Telephone switch P. 304 Talk switch P. 304 “DISP” switch P. 158 F-sport mode total control switch P. 140, 199 Cruise control switch P. 173 Dynamic radar cruise control switch P. 177 ...
Page 18
Pictorial index Instrument panel SNOW mode switch P. 140 Windshield wiper de-icer switch P. 229 Distance switch P. 177 Headlight cleaner switch P. 172 VSC off switch P. 198 Instrument panel light control knob P. 152 Satellite switches P.
All specifications provided in this manual are current at the time of printing. How- ever, because of the Lexus policy of continual product improvement, we reserve the right to make changes at any time without notice. Depending on specifications, the vehicle shown in the illustration may differ from your vehicle in terms of color and equipment.
Page 20
● Seat belt pretensioner system ● Be sure to check with your Lexus dealer for precautionary measures or special instructions regarding installation of a mobile two-way radio system. Scrapping of your Lexus The SRS airbag and seat belt pretensioner devices in your Lexus contain explosive chemicals.
Page 21
The computers do not record conversations, sound or pictures. ● Data usage Lexus may use the data recorded in these computers to diagnose malfunctions, conduct research and development, and improve quality. Lexus will not disclose the recorded data to a third party except: •...
Page 22
● Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehi- cle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or near crash event.
Page 23
● Disclosure of the EDR data Lexus will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’ s owner (or the leasing company for a leased vehicle) is obtained •...
Page 24
CAUTION General precautions while driving ■ Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to operate your vehicle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 25
This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Lexus and its equipment. Symbols used in illustrations Safety symbol The symbol of a circle with a slash through it means “Do not”,...
Before driving 1-1. Key information 1-4. Opening and closing the windows and moon roof Keys..........28 Power windows......76 Moon roof ........79 1-2. Opening, closing and locking the doors and trunk 1-5. Refueling Smart access system with Opening the fuel tank cap ..83 push-button start....
1-1. Key information Keys The following keys are provided with the vehicle. Electronic keys • Operating the smart access system with push-button start (P. 32) • Operating wireless remote control function (P. 43) Mechanical keys Key number plate ■ Card key (Canada only) Electronic key Operating the smart access sys- tem with push-button start...
Page 29
1-1. Key information Using the mechanical key Take out the mechanical key. The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re-attempt to insert it.
Page 30
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a mechanical key is lost, a new key can be made at your Lexus dealer using the key number plate. (P. 498) When riding in an aircraft ■...
Page 31
(To remove the battery cover, lightly grasp and pull it.) If the battery is corroded, have your Lexus dealer replace the battery. Do not crush the battery cover or use a screwdriver to remove the battery cover.
1-2. Opening, closing and locking the doors and trunk Smart access system with push-button start The following operations can be performed simply by carrying the elec- tronic key (including the card key ) on your person, for example in your pocket.
Page 33
1-2. Opening, closing and locking the doors and trunk Unlocking and locking the doors (front door handles only) Grip the handle to unlock the door. Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after the door is locked.
Page 34
1-2. Opening, closing and locking the doors and trunk Antenna location and effective range ■ Antenna location Antennas outside cabin Antennas inside cabin Antenna inside trunk Antenna outside trunk...
Page 35
1-2. Opening, closing and locking the doors and trunk ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (70 cm) of either of the outside front door handles.
Page 36
1-2. Opening, closing and locking the doors and trunk Operation signals ■ A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Conditions affecting operation ■ The smart access system with push-button start uses weak radio waves. In the fol- lowing situations, the communication between the electronic key and the vehicle may be affected, preventing the smart access system with push-button start from operating properly:...
Page 37
1-2. Opening, closing and locking the doors and trunk Switching the door unlock function ■ It is possible to set which doors the entry function unlocks. Turn the “ENGINE START STOP” switch OFF. STEP When the indicator on the key surface is turned off, push and STEP hold , or...
Page 38
1-2. Opening, closing and locking the doors and trunk Battery-saving function ■ In the following circumstances, the entry function is disabled in order to prevent the vehicle and electronic key batteries from discharging. When the entry function has not been used for 30 days or more ●...
Page 39
1-2. Opening, closing and locking the doors and trunk To operate the system properly ■ Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle.
Page 40
1-2. Opening, closing and locking the doors and trunk When the vehicle is not driven for extended periods ■ To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. Security feature ■...
Page 41
When the electronic key battery is fully depleted ■ P. 429 Customization that can be configured at Lexus dealer ■ It is possible to deactivate the operation signals of the system, such as the emer- gency flashers. (Customizable featuresP. 538) Certification for the smart access system with push-button start ■...
Page 42
The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Lexus dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.
(push and hold) Sounds alarm (push and hold) (P. 44) *: This setting must be customized at your Lexus dealer. Operation signals ■ Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Trunk: A buzzer sounds to indicate that the trunk has been unlocked.
Page 44
P. 40 When the electronic key battery is fully depleted ■ P. 429 Conditions affecting operation ■ P. 36 Customization that can be configured at Lexus dealer ■ Settings (e.g. trunk unlocking function) can be changed. (Customizable features P. 538)
Page 45
1-2. Opening, closing and locking the doors and trunk Certification for wireless remote control ■ For vehicles sold in the U.S.A. FCC ID: HYQ14AEM FCC ID: HYQ14ABB FCC ID: HYQ13BZH FCC ID: HYQ14ABK FCC ID: HYQ14ABS FCC ID: HYQ13BZW NOTE: This device complies with part 15 of the FCC Rules.
1-2. Opening, closing and locking the doors and trunk Doors The vehicle can be locked and unlocked using the entry function, wireless remote control or door lock switch. ■ Entry function P. 33 ■ Wireless remote control P. 43 ■ Door lock switch Locks all doors Unlocks all doors...
Page 47
1-2. Opening, closing and locking the doors and trunk Locking the front doors from the outside without a key The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle.
Page 48
1-2. Opening, closing and locking the doors and trunk ■ Setting and canceling the functions To switch between setting and canceling, follow the procedure below: Close all the doors and switch the “ENGINE START STOP” STEP switch to IGNITION ON mode. (Perform the step 2 within 10 seconds.) Shift the shift lever to P or N, press STEP...
Page 49
Using the mechanical key ■ The doors can also be locked and unlocked with the mechanical key. (P. 499) Customization that can be configured at Lexus dealer ■ Settings (e.g. unlocking function using a key) can be changed. (Customizable features P. 538)
1-2. Opening, closing and locking the doors and trunk Trunk The trunk can be opened using the trunk opener, entry function or wireless remote control. ■ Opening the trunk from inside the vehicle Press the opener switch. ■ Opening the trunk from outside the vehicle Entry function P.
Page 51
1-2. Opening, closing and locking the doors and trunk Trunk light ■ When the trunk light switch is set to on, the trunk light turns on when the trunk is opened. Trunk handle ■ Use the trunk handle when closing the trunk. Be careful not to pull the trunk lid sideways when closing the trunk with the handle.
Page 52
1-2. Opening, closing and locking the doors and trunk CAUTION Caution while driving ■ Keep the trunk lid closed while driving. ● If the trunk lid is left open, it may hit near-by objects while driving or luggage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard.
Page 53
Do not attach any accessories other than genuine Lexus parts to the trunk lid. ● Such additional weight on the trunk lid may cause the lid to fall closed again after...
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position switch Seatback angle switch Seat cushion (front) angle switch Vertical height adjustment switch Lumbar support switch CAUTION Seat adjustment ■ Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
1-3. Adjustable components (seats, mirrors, steering wheel) Driving position memory (driver’s seat) Your preferred driving position (the position of the driver's seat, steering wheel and outside rear view mirrors) can be memorized and recalled with the touch of a button. It is also possible to set this function to activate auto- matically when the doors are unlocked.
Page 56
1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Record your driving position to button “1”, “2” or “3” before performing the following. Using the wireless remote control Turn the “ENGINE START STOP” switch OFF and close the STEP driver's door.
Page 57
1-3. Adjustable components (seats, mirrors, steering wheel) Using the door lock switch Carry only the key (including the card key ) to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly.
Page 58
1-3. Adjustable components (seats, mirrors, steering wheel) Canceling the linked door unlock operation ■ Turn the “ENGINE START STOP” switch OFF and close the driver's door. STEP Using the wireless remote control: While pushing the “SET” button, press STEP on the wireless remote control until the signal beeps. Using the door lock switch: While pressing the “SET”...
1-3. Adjustable components (seats, mirrors, steering wheel) Seat position memory (front passenger’s seat) Your preferred front passenger seat position can be memorized and recalled with the touch of a button. Three different seat positions can be entered into memory. ■ Entering a position to memory Turn the “ENGINE START STOP”...
Page 60
1-3. Adjustable components (seats, mirrors, steering wheel) Operating the seat position memory after turning the “ENGINE START STOP” ■ switch OFF Memorized position can be activated up to 180 seconds after the front passenger door is opened, even after turning the “ENGINE START STOP” switch OFF. To cancel seat position recall ■...
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Vertical adjustment (front seats) Pull the head restraints up. Down Push the head restraint down while pushing the lock release Lock release button button. Folding operation (rear seats) To stow the head restraint by folding it forward, pull the head...
Page 62
1-3. Adjustable components (seats, mirrors, steering wheel) Installing the head restraints (front seats) ■ Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Removing the head restraints (rear seats) ■...
Page 63
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the head restraints ■ Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. When using the rear seat head restraints ■...
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 65
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Down (while pressing the height adjuster) Move the height adjuster up and down as needed until you hear a click. Seat belt comfort guide (rear seats) If the shoulder belt sits close to a person’...
Page 66
1-3. Adjustable components (seats, mirrors, steering wheel) Pre-collision seat belts (front seats of vehicles with pre-collision system) If the pre-collision sensor detects that a collision is unavoidable, the pre- collision safety system will retract the seat belt, thus enhancing the effec- tiveness of the seat belt pretensioner in a crash.
Page 67
Seat belt extender ■ If your seat belts cannot be fastened securely because they are not long enough, a person- alized seat belt extender is available from your Lexus dealer free of charge.
Page 68
Each seat belt should be used by one person only. Do not use a seat belt for more ● than one person at once, including children. Lexus recommends that children be seated in the rear seat and always use a seat ● belt and/or an appropriate child restraint system.
Page 69
CAUTION If the pretensioner has activated, the SRS warning light will come on. In that case, ● the seat belt cannot be used again and must be replaced at your Lexus dealer. Seat belt damage and wear ■ Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Down Away from the driver Toward the driver Auto tilt away When the “ENGINE START STOP” switch is turned OFF, the steering wheel returns to its stowed position by moving up and away to enable easier driver entry...
Page 71
■ A desired steering position can be entered to memory and recalled automatically by the driving position memory. (P. 55) Customization that can be configured at Lexus dealer ■ It is possible to deactivate the auto tilt-away function. (Customizable featuresP. 538)
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduce the reflected light. Without compass Turns automatic mode on Turns automatic mode off The indicator comes on when automatic mode is turned on.
Page 73
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. To prevent sensor error ■ To ensure that the sensors operate properly, do not touch or cover them.
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch when the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. Select a mirror to adjust (“L”: left or “R”: right) Adjust the mirror up, down, in, or out using the switch The mirrors can be operated when...
Page 75
1-3. Adjustable components (seats, mirrors, steering wheel) Linked mirror function when reversing ■ The outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. However, this function will not operate when the mirror select switch is in the neutral position (between “L”...
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing Opening One-touch opening : Pushing the switch in the oppo- site direction will stop window travel partway.
Page 77
If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Lexus dealer. Customization that can be configured at Lexus dealer ■...
Page 78
1-4. Opening and closing the windows and moon roof CAUTION Closing the windows ■ Observe the following precautions. Failing to do so may result in death or serious injury. Check to make sure that all passengers do not have any part of their body in a ●...
1-4. Opening and closing the windows and moon roof Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully opened position. Push the switch again to fully open.
Page 80
1-4. Opening and closing the windows and moon roof The moon roof can be operated when ■ The “ENGINE START STOP” switch is in IGNITION ON mode. Moon roof open warning buzzer ■ The buzzer sounds and a message is shown on the multi-information display in the instrument panel when the “ENGINE START STOP”...
Page 81
If the moon roof does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Lexus dealer. Customization that can be configured at Lexus dealer ■...
Page 82
1-4. Opening and closing the windows and moon roof CAUTION Opening the moon roof ■ Observe the following precautions. Failing to do so may cause death or serious injury. Do not allow any passengers to put their hands or heads outside the vehicle while ●...
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the “ENGINE START STOP” switch OFF and ensure that all the doors and windows are closed. ■ Opening the fuel tank cap Press the opener switch.
Page 84
1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly in the opposite direction. Fuel types ■ Use unleaded gasoline. (Octane rating 91 [Research Octane Number 96] or higher) Fuel tank capacity (reference) ■...
Page 85
When replacing the fuel cap ■ Do not use anything but a genuine Lexus fuel tank cap designed for your vehicle. Failure to do so may cause a fire or other incident which may result in death or seri- ous injury.
1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the “ENGINE START STOP”...
Page 87
1-6. Theft deterrent system Certifications for the engine immobilizer system ■ For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1-6. Theft deterrent system Alarm The system sounds the alarm and flashes the lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set. ● A locked door or trunk is unlocked or opened in any way other than using the entry function, wireless remote door lock function or mechanical key.
Page 89
1-6. Theft deterrent system Items to check before locking the vehicle ■ To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. Nobody is in the vehicle. ● The windows and moon roof are closed before the alarm is set. ●...
Page 90
1-6. Theft deterrent system NOTICE To ensure the system operates correctly ■ Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law.
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (P. 54) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 93
1-7. Safety information CAUTION While driving ■ Do not adjust the position of the driver’ s seat while driving. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. ●...
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
Page 95
1-7. Safety information Airbag system components Knee airbags Driver airbag Front passenger airbag Driver's seat belt buckle switch Curtain shield airbags Driver's seat position sensor “AIR BAG ON” and “AIR BAG Front passenger’ s seat belt OFF” indicator lights buckle switch Side airbags Airbag sensor assembly Side and curtain shield airbag...
Page 96
1-7. Safety information In certain types of severe frontal or side impacts, the SRS airbag system triggers the airbag inflators. A chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
Page 97
1-7. Safety information SRS airbag deployment conditions (front airbags) ■ The SRS front airbags will deploy in the event of an impact that exceeds the ● set threshold level (the level of force corresponding to an approximately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 98
1-7. Safety information Conditions under which the SRS airbags may deploy (inflate), other than a colli- ■ sion The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. Hitting a curb, edge of pavement or hard ●...
Page 99
1-7. Safety information Types of collisions that may not deploy the SRS airbags ■ (side and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 100
1-7. Safety information When to contact your Lexus dealer ■ In the following cases, contact your Lexus dealer as soon as possible. Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or ●...
Page 101
1-7. Safety information CAUTION SRS airbag precautions ■ Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts properly. ● The SRS airbags are supplemental devices to be used with the seat belts.
Page 102
An infant or child who is too small to use a seat belt should be properly secured using a child restraint system. Lexus strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained.
Page 103
1-7. Safety information CAUTION SRS airbag precautions ■ Do not sit on the edge of the seat or lean ● against the dashboard. Do not allow a child to stand in front of the ● SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 104
If the areas where the SRS airbags are stored, such as the steering wheel pad and ● front pillar garnish, are damaged or cracked, have them replaced by your Lexus dealer.
Page 105
Modification and disposal of SRS airbag system components ■ Do not dispose of your vehicle or perform any of the following modifications with- out consulting your Lexus dealer. The SRS airbag may malfunction or deploy (inflate) accidentally, causing death or serious injury.
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification sys- tem. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light “AIR BAG OFF”...
Page 107
1-7. Safety information Condition and operation in the front passenger occupant classification system ■ Adult “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG cator lights ON” Indicator/ SRS warning light warning light Front passenger’ s seat belt reminder light Flashing Front passenger airbag Side airbag on the front...
Page 108
1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indi- Not illuminated cator lights Indicator/ warning light SRS warning light Front passenger’ s seat belt reminder light Front passenger airbag Side airbag on the front Deactivated passenger seat Devices Front passenger knee airbag Curtain shield airbag in the front passenger side...
Page 109
1-7. Safety information : Never install a rear-facing child restraint system on the front passen- ger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (P. 111) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 110
● the SRS warning light may come on to indicate a malfunction of the detection sys- tem. In this case, contact your Lexus dealer immediately. Child restraint systems installed on the rear seat should not contact the front seat- ●...
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 112
1-7. Safety information Convertible seat Booster seat Selecting an appropriate child restraint system ■ Use a child restraint system appropriate for the child until the child becomes ● large enough to properly wear the vehicle’ s seat belt. If a child is too large for a child restraint system, sit the child on a rear seat and ●...
Page 113
CAUTION Child restraint precautions ■ Lexus strongly urges the use of a proper child restraint system that conforms to ● the size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 114
1-7. Safety information CAUTION When children are in the vehicle ■ Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child's neck, it may lead to choking or other serious injuries that could result in death.
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not com- patible with the LATCH (Lower Anchors and Tethers for Children) system.
Page 116
1-7. Safety information Installation with LATCH system Type A Widen the gap between STEP the seat cushion and seat- back slightly. Latch the hooks onto the STEP LATCH anchors. If the child restraint has a STEP top tether strap, the top tether strap should be latched onto the top tether strap anchors.
Page 117
1-7. Safety information Type B Widen the gap between STEP the seat cushion and seat- back slightly. Latch the buckles onto the STEP LATCH anchors. If the child restraint has a STEP top tether strap, the top tether strap should be latched onto the top tether strap anchors.
Page 118
1-7. Safety information Run the seat belt through the child STEP seat and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and STEP then allow it to retract slightly in order to activate the ALR lock mode.
Page 119
1-7. Safety information Run the seat belt through the child STEP seat and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and STEP allow it to retract to put it in lock mode.
Page 120
1-7. Safety information ■ Booster seat Place the booster seat on the seat STEP facing the front of the vehicle. Sit the child in the booster seat. Fit STEP the seat belt to the booster seat according to the manufacturer's instructions and insert the plate into the buckle.
Page 121
1-7. Safety information Child restraint systems with a top tether strap Secure the child restraint using a STEP seat belt or the lower anchors, and lock the head restraint in place at the original position. Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether...
Page 122
1-7. Safety information CAUTION When installing a child restraint system ■ Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passen- gers may be injured or even killed in the event of sudden braking, sudden swerving or an accident.
Page 123
1-7. Safety information CAUTION Do not use a seat belt extender ■ If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of sudden braking, sudden swerving or an accident.
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driving. ■ Starting the engine (P. 134) ■ Driving With the brake pedal depressed, shift the shift lever to D. STEP (P. 138) Release the parking brake. (P.
Page 127
Your vehicle has a drum-in-disc type parking brake system. This type of brake sys- tem needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Lexus dealer perform the bed- ding down.
Page 128
Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Lexus dealer immediately. Do not shift the shift lever to P while the vehicle is moving.
Page 129
2-1. Driving procedures CAUTION Moving the shift lever to N while the vehicle is moving will disengage the engine ● from the transmission. Engine braking is not available when N is selected. During normal driving, do not turn off the engine. Turning the engine off while ●...
Page 130
If you hear a squealing or scraping noise (brake pad wear limit indicators) ■ Have your Lexus dealer check and replace the brake pads as soon as possible. Rotor damage can result if the pads are not replaced when needed.
Page 131
Lexus dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 132
2-1. Driving procedures CAUTION When taking a nap in the vehicle ■ Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating.
Page 133
Engine damage caused by water immersion ● In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Lexus dealer check the following. Brake function ● Changes in quantity and quality of oil and fluid used for the engine, transmission, ●...
2-1. Driving procedures Engine (ignition) switch Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine Check that the parking brake is set. STEP Check that the shift lever is set in P.
Page 135
2-1. Driving procedures ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) OFF* The emergency flashers can be used.
Page 136
“ENGINE START STOP” switch again while turning the steering wheel left and right. When the “ENGINE START STOP” switch indicator flashes in amber ■ The system may be malfunctioning. Have the vehicle inspected by your Lexus dealer immediately. Auto power off function ■...
Page 137
2-1. Driving procedures CAUTION When starting the engine ■ Always start the engine while sitting in the driver’ s seat. Do not press the accelera- tor while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. Stopping the engine in an emergency ■...
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever and selecting a shift position While the “ENGINE START STOP” switch is IGNITION mode, depress the brake pedal and move the shift lever.
Page 139
2-1. Driving procedures ■ Shift position uses Shift position Display Function Purpose Gears between 1 and 8 are auto- Normal D matically position driv- selected according to driving condi- tions Allows opti- Shift range mum use of selection engine brak- (P.
Page 140
2-1. Driving procedures ■ Selecting a driving mode The following modes can be selected to suit driving conditions: Snow mode For accelerating and driving on slippery road surfaces, such as on snow. “Sport” mode (P. 199) To cancel a mode, press the same switch again.
Page 141
2-1. Driving procedures Selecting shift ranges in the D position To drive using temporary shift range selection, operate the “-”paddle shift switch. The shift range can then be selected by operating the “-” and “+” paddle shift switches. Changing the shift range allows restriction of the highest gear, preventing unnecessary upshifting and enabling the level of engine braking force to be selected.
Page 142
2-1. Driving procedures ■ Shift ranges and their functions Meter cluster dis- Function play* Gears between 1 and 8 are automatically selected according to vehicle speed and driving conditions Gears between 1 and 7 are automatically selected according to vehicle speed and driving conditions Gears between 1 and 6 are automatically selected according to vehicle speed and driving conditions Gears between 1 and 5 are automatically selected...
Page 143
2-1. Driving procedures Selecting gears in the M position To enter M mode, shift the shift lever to the M position. Gears can then be selected by operating the shift lever or paddle shift switches, allowing you to drive in the gear of your choosing. Upshifting Downshifting The gear changes once every time...
Page 144
2-1. Driving procedures ■ Gear functions Meter cluster dis- Function play* The gear is fixed at 8 gear The gear is fixed at 7 gear The gear is fixed at 6 gear The gear is fixed at 5 gear The gear is fixed at 4 gear The gear is fixed at 3 gear...
Page 145
2-1. Driving procedures Rev indicator ■ When the shift lever is in D (paddle shift ● switches operated) or in M, an indicator on the tachometer illuminates in 3 steps in the case of high engine speeds to encourage the driver to upshift. If the third (red) segment illuminates, a ●...
Page 146
When the warning message goes out, the vehicle can be driven again. If the warning message does not go out after waiting a while, have your vehicle inspected by your Lexus dealer. AI-SHIFT ■ The AI-SHIFT automatically selects the suitable gear according to driver perfor- mance and driving conditions.
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever part- way to signal a lane change The right hand signal will flash until you release the lever. Move and hold the lever part- way to signal a lane change The left hand signal will flash until you release the lever.
2-1. Driving procedures Parking brake Sets the parking brake (Depressing the pedal again releases the parking brake.) : Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. Canada U.S.A. Usage in winter time ■...
2-2. Instrument cluster Gauges and meters The units used on the speedometer and the tachometer gauge display may differ depending on the model/type. The following gauges, meters and display illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode. Engine coolant temperature gauge Displays the engine coolant temperature.
Page 151
2-2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute. Shift position and shift range/gear display Displays the shift position along with the currently selected shift range or gear. (P. 141, 143) Odometer/trip meter and trip meter reset button Switches between odometer and trip meter displays.
Page 152
2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter Changing units for the digital speedometer ■ Units for the digital speedometer can be changed between km/h and mph by push- ing and holding the odometer/trip meter reset button while the odometer is dis- played.
Page 153
2-2. Instrument cluster CAUTION When the temperature of the display is extremely low ■ Allow the interior of the vehicle to warm up before using the shift position and shift range/gear display. At extremely low temperatures, the display may respond slowly, and display changes may be delayed.
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. Instrument cluster The units used on the speedometer and the tachometer gauge display may differ depending on the model/type.
Page 155
They will turn off after the engine is started, or after a few sec- onds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Lexus dealer.
Page 156
They will turn off after the engine is started, or after a few sec- onds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Lexus dealer.
2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving- related data, including the current outside air temperature. ● Trip information (P. 158) Displays driving range, fuel con- sumption and other cruising- related information. ●...
2-2. Instrument cluster Trip information Display items can be switched by pushing the “DISP” switch. ■ Outside temperature Displays the outside air temperature. The temperature range that can be displayed is from -40F (-40C) to 122F (50C). When the temperature drops to 37 ...
Page 159
2-2. Instrument cluster ■ Average fuel consumption Displays the average fuel consumption since the function was reset. • The function can be reset by pushing the “DISP” switch for longer than one second when the average fuel consumption is displayed. •...
Page 160
2-2. Instrument cluster ■ Gear position display Indicates the current gear, and the range of gears that is available when the shift lever is in the D posi- tion. The gear range is shown by the number of dots () and the current gear is shown as a number. The transmission automatically selects the gears within the driver selected gear range.
Page 161
2-2. Instrument cluster CAUTION The information display at low temperatures ■ Allow the interior of the vehicle to warm up before using the liquid crystal informa- tion display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver's downshifting and the new gear number appearing on the display.
2-3. Operating the lights and windshield wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A The daytime running lights turn on. U.S.A. Canada The side marker, tail, license plate, daytime running lights and instrument panel lights...
Page 163
2-3. Operating the lights and windshield wipers Type B The daytime running lights turn on. The side marker, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 164
2-3. Operating the lights and windshield wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 165
The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users. Customization that can be configured at Lexus dealer ■ Settings (e.g. light sensor sensitivity) can be changed.
2-3. Operating the lights and windshield wipers Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Type A Front fog lights off Front fog lights on...
Page 167
2-3. Operating the lights and windshield wipers Type B Front fog lights off Front fog lights on...
2-3. Operating the lights and windshield wipers Windshield wipers and washer With “AUTO” selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume. Type A Rain-sensing wiper operation Low speed wiper operation High speed wiper operation Temporary operation...
Page 169
2-3. Operating the lights and windshield wipers Type B Rain-sensing wiper operation Low speed wiper operation High speed wiper operation Temporary operation Washer/wiper dual operation Wipers operate automatically. (After operating several times, the wipers operate one more time after a short delay to pre- vent dripping.)
Page 170
2-3. Operating the lights and windshield wipers The windshield wipers and washer can be operated when ■ The “ENGINE START STOP” switch is in IGNITION ON mode. Effects of vehicle speed on wiper operation ■ With the settings other than “AUTO” also, the time until drip prevention wiper sweep occurs is changed depending on vehicle speed.
Page 171
■ Check that the washer nozzles are not blocked if there is washer fluid in the wind- shield washer fluid reservoir. Customization that can be configured at Lexus dealer ■ Settings (e.g. drip prevention function) can be changed. (Customizable features P. 538) CAUTION Caution regarding the use of windshield wipers in “AUTO”...
2-3. Operating the lights and windshield wipers Headlight cleaner switch Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. The headlight cleaner can be operated when ■ The “ENGINE START STOP” switch is in IGNITION ON mode and the headlight switch is turned on.
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicator Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on.
Page 174
2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 175
If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Lexus dealer.
Page 176
2-4. Using other driving systems CAUTION To avoid operating the cruise control by mistake ■ Switch the cruise control off using the “ON-OFF” button when not in use. Situations unsuitable for cruise control ■ Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
2-4. Using other driving systems Dynamic radar cruise control Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehicles ahead. Indicator Display Set speed...
Page 178
2-4. Using other driving systems ■ Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on. Press the button again to deacti- vate the cruise control. Accelerate or decelerate the STEP vehicle to the desired speed,...
Page 179
2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 180
2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Pressing the button changes the Preceding vehicle-to-vehicle distance as vehicle mark follows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the “ENGINE START STOP” switch is turned to IGNITION ON mode.
Page 181
2-4. Using other driving systems ■ Canceling and resuming the speed control Pulling the lever toward you cancels the cruise control. The speed setting is also can- celed when the brakes are applied. Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed.
Page 182
2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle- to-vehicle following distance, and operates to maintain a suitable follow- ing distance from the vehicle ahead.
Page 183
2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.
Page 184
2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehi- cle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 185
“AUTO” mode or the high speed wiper operation position). When snow mode is set. ● If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Lexus dealer.
Page 186
2-4. Using other driving systems Automatic cancelation of constant speed control ■ The cruise control will stop maintaining the vehicle speed in the following situations: Actual vehicle speed is more than approximately 10 mph (16 km/h) below the ● set vehicle speed. At this time, the memorized set speed is not retained.
Page 187
2-4. Using other driving systems Certification ■ For vehicles sold in U.S.A. FCC ID: HYQDNMWR005 This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 188
2-4. Using other driving systems CAUTION Before using dynamic radar cruise control ■ Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropri- ate, adjust the vehicle speed, as well as the distance between your vehicle and vehi- cles ahead by applying the brakes etc.
Page 189
2-4. Using other driving systems CAUTION Situations unsuitable for dynamic radar cruise control ■ Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an accident resulting in death or serious injury.
Page 190
If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Lexus dealer. Do not disassemble the sensor.
2-4. Using other driving systems Intuitive parking assist The distance to obstacles measured by the sensors is communicated via the multi-information display and a buzzer when parallel parking or maneuvering into a garage. Always check the surrounding area when using this system.
Page 192
2-4. Using other driving systems ■ Switching the intuitive parking assist on (P. 343) When on, an indicator is dis- played to inform the driver that the function is operational. The distance display and buzzer When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds.
Page 193
2-4. Using other driving systems ■ Rear corner sensors Multi-information Approximate distance Buzzer display to obstacle 1.6 to 1.2 ft. Medium (50 to 37.5 cm) 1.2 to 0.8 ft. Fast (37.5 to 25 cm) 0.8 ft. (25cm) or less Continuous ■...
Page 194
2-4. Using other driving systems Detection range of the sensors Approximately 1.6 ft. (50 cm) Approximately 4. 9 ft. (150 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obstacles that are extremely close to the vehicle.
Page 195
2-4. Using other driving systems Sensor detection information ■ Certain vehicle conditions and the surrounding environment may affect the ● ability of the sensor to correctly detect obstacles. Particular instances where this may occur are listed below. • There is dirt, snow or ice on the sensor. •...
Page 196
For vehicles sold in Canada This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada. Customization that can be configured at Lexus dealer ■ Settings (e.g. buzzer volume) can be changed. (Customizable features P. 538)
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 198
2-4. Using other driving systems When the VSC/TRAC/hill-start assist control systems are operating The slip indicator light flashes to indicate that the VSC/TRAC/hill- start assist control systems have been engaged. The stop lights and high mounted stoplight turn on when the hill-start assist control system is operating.
Page 199
2-4. Using other driving systems ■ Turning off TRAC and VSC Push and hold the switch for 3 sec- onds or more to turn off TRAC and VSC. The “TRAC OFF” indicator light and VSC off indicator light should come on. Push the switch again to turn the system back on.
Page 200
When the “TRAC OFF” indicator light comes on even if the VSC off switch has ■ not been pressed TRAC and hill-start assist control cannot be operated. Contact your Lexus dealer. Automatic reactivation of the TRAC/VSC systems ■ If the TRAC/VSC systems are turned off, re-starting the engine will automatically reactivate them.
Page 201
If the slip indicator comes on ■ It may indicate a malfunction in the VSC, TRAC or hill-start assist control system. Contact your Lexus dealer. CAUTION The ABS does not operate effectively when ■...
Page 202
The ABS, VSC and TRAC systems will not function correctly if different tires are fit- ted on the vehicle. Contact your Lexus dealer for further information when replacing tires or wheels. Handling of tires and suspension ■...
2-4. Using other driving systems PCS (Pre-Collision System) When the radar sensor detects possibility of a frontal collision, the pre- collision system such as the brakes and seat belts are automatically engaged to lessen impact and injuries to occupants as well as vehicle dam- age.
Page 204
2-4. Using other driving systems Disabling the pre-collision braking The pre-collision braking function can be turned on and off using the satellite switch. (P. 343) Press “” or “” to display the “PCS BRAKE” setting ( ). Then, press the “ON/OFF” button in the middle of the switch to select either “ON”...
Page 205
2-4. Using other driving systems The pre-collision system is operational when ■ Pre-collision seat belts (type A): ● • Vehicle speed is above 4 mph (5 km/h). • The speed at which your vehicle is approaching the obstacle or oncoming vehicle exceeds about 19 mph (30 km/h).
Page 206
2-4. Using other driving systems When an extreme change in vehicle height occurs ● When the axis of the radar is out of adjustment ● When passing through certain toll gates ● When driving on a bridge. ● When the system is activated in the situations described above there is also a possi- bility that the seat belts will retract quickly and the brakes will be applied with a force greater than normal.
Page 207
2-4. Using other driving systems Certification ■ For vehicles sold in U.S.A. FCC ID: HYQDNMWR005 This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 208
If the sensor moves even slightly off position, the system may become inaccurate or malfunction. If the sensor or surrounding area are subject to a strong impact, always have the area inspected and adjusted by a Lexus dealer. Do not disassemble the sensor.
Page 209
2-4. Using other driving systems CAUTION Cautions regarding the assist contents of the system ■ By means of alarms and brake control, the pre-collision system is intended to assist the driver in avoiding collisions through the process of LOOK-JUDGE-ACT. There are limits to the degree of assistance the system can provide, so please keep in mind the following important points.
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load. ● Stow cargo and luggage in the trunk whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 211
Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehi- cle. Lexus does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. Example on your vehicle...
Page 212
2-5. Driving information CAUTION Things that must not be carried in the trunk ■ The following things may cause a fire if loaded in the trunk. Receptacles containing gasoline ● Aerosol cans ● Storage precautions ■ Observe the following precautions. Failing to do so may result in death or serious injury.
Seating capacity means the maximum number of occupants whose esti- mated average weight is 150 lb. (68 kg) per person. ■ Towing capacity Lexus does not recommend towing a trailer with your vehicle. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 215
Repairing or replacing snow tires ■ Request repairs of and obtain replacement snow tires from Lexus dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning system.
2-5. Driving information Trailer towing Lexus does not recommend towing a trailer with your vehicle. Lexus also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your Lexus is not designed...
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle ■ Do not tow your vehicle with four wheels on the ground.
Interior features ® 3-1. Using the air conditioning 3-3. Using the Bluetooth system and defogger audio system ® Automatic air conditioning Bluetooth audio system ..280 ® system ........220 Using the Bluetooth Rear window and audio system......283 ® outside rear view Operating a Bluetooth mirror defoggers....
Page 219
Interior features 3-5. Using the interior lights 3-7. Other interior features Interior lights list....330 Sun visors ......... 340 • Interior lights ....... 332 Vanity mirrors ......341 • Personal lights..... 332 Clock......... 342 Satellite switches ....343 3-6. Using the storage features Ashtrays........
3-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the tem- perature setting. With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.
Page 221
3-1. Using the air conditioning system and defogger Press “” on to increase the temperature and “” to STEP decrease the temperature. The temperature for the driver and passenger seats can be set sepa- rately. Adjusting the settings ■ Adjusting the temperature setting Press “”...
Page 222
3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press The air outlets switch each time is pressed. The air flow shown on the display indicates the following. Upper body Upper body and feet Feet...
Page 223
3-1. Using the air conditioning system and defogger Feet and windshield ■ Switching between outside air and recirculated air modes Press The mode switches among (recycles air inside the vehicle), “AUTO” (introduces air from outside the vehicle) modes each time the is pressed.
Page 224
3-1. Using the air conditioning system and defogger Micro dust and pollen filter Press Outside air mode switches to (recirculated air) mode. Pol- len is removed from the air and the air flows to the upper part of the body. Usually the system will turn off automatically after approximately 1 to 3 minutes.
Page 225
3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Front outlets (center) Direct air flow to the left or right, up or down Turn the knob to open or close the vent Front outlets (right and left side) Direct air flow to the left or right,...
Page 226
There may be a problem in the air conditioning system if the indicator light continues to flash. Turn the air conditioning system off and have it inspected by your Lexus dealer. Automatic mode for air intake control ■...
Page 227
3-1. Using the air conditioning system and defogger Air conditioning odors ■ During use, various odors from inside and outside the vehicle may enter into ● and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers These features are used to defog the rear window, and to remove rain- drops, dew and frost from the outside rear view mirrors. With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.
3-1. Using the air conditioning system and defogger Windshield wiper de-icer This feature is used to prevent ice from building up on the windshield and wiper blades. On/off The windshield wiper de-icer will automatically turn off after approximately 15 minutes. The windshield wiper de-icer can be operated when ■...
3-2. Using the audio system Audio system type With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system (type A) CD player with changer and AM/FM radio Without navigation system (type B) CD player with changer and AM/FM radio...
Page 231
3-2. Using the audio system Title Page Using the radio P. 233 Using the CD player P. 241 Playing back MP3 and WMA discs P. 248 Operating an iPod P. 256 Operating a USB memory P. 264 Optimal use of the audio system P.
Page 232
3-2. Using the audio system Using cellular phones ■ Interference may be heard through the audio system’ s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. CAUTION For vehicles sold in U.S.A. and Canada ■...
3-2. Using the audio system Using the radio Type A Station Seeking any traffic program station selector Displays radio text messages Silencing a sound Adjusting the frequency Power Volume (AM, FM mode) or channel (SAT mode) Seeking the Changing the program types frequency AMFM/SAT Scans for receivable stations...
Page 234
3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) Search for desired stations by turning or pressing “” or STEP “” on Press and hold the button (from ) the station is to STEP be set to until you hear a beep. ®...
Page 235
3-2. Using the audio system RDS (Radio Data System) (type A) This feature allows your radio to receive station identification information and program information (classical, jazz, etc.) from radio stations which broadcast this information. ■ Receiving RDS broadcasts Press “” or “” on during FM reception.
Page 236
3-2. Using the audio system ■ Displaying radio station names Press ■ Displaying radio text messages Press twice. If “MSG” shows in the display, a text message will be displayed. If the text continues past the end of the display, is displayed.
Page 237
3-2. Using the audio system ® ■ Scanning XM Satellite Radio channels ● Scanning channels in the current category Press STEP When the desired channel is reached, press again. STEP ● Scanning preset channels Press and hold until you hear a beep. STEP When the desired channel is reached, press again.
Page 238
3-2. Using the audio system When the battery is disconnected ■ Station presets are erased. Reception sensitivity ■ Maintaining perfect radio reception at all times is difficult due to the continually ● changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc.
Page 239
XM antenna cable is attached securely. “ANTENNA” There is a short-circuit in the antenna or the surround- ing antenna cable. See a Lexus certified dealer. ® You have not subscribed to the XM Satellite Radio. The radio is being updated with the latest encryption ®...
Page 240
3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previ- “CH UNAVL” ous channel or “CH001”. If it does not change auto- matically, select another channel. ®...
3-2. Using the audio system Using the CD player Type A Playback/Pause Repeat play Displays text Random playback message Silencing a sound Power Volume CD selection CD eject Playback CD load Track selection Search playback Type B Playback/Pause Repeat play Displays text Random playback message...
Page 242
3-2. Using the audio system Loading CDs ■ Loading a CD Push STEP “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to STEP green. The display changes from “WAIT” to “LOAD”. ■...
Page 243
3-2. Using the audio system Ejecting CDs ■ Ejecting a CD To select the CD to be ejected, STEP press “” or “” on The number of the CD selected is shown on the display. Press and remove the CD. STEP ■...
Page 244
3-2. Using the audio system Selecting a CD ■ To select a CD to play To select the desired CD, press “” or “” on ■ To scan loaded CDs (type A) Press and hold until you hear a beep. STEP The first ten seconds of the first track on each CD will be played.
Page 245
“WAIT”: Operation is stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Lexus dealer if the CD still cannot be played back. Discs that can be used ■...
Page 246
3-2. Using the audio system CD player protection feature ■ To protect the internal components, playback is automatically stopped when a problem is detected. If CDs are left inside the CD player or in the ejected position for extended peri- ■...
Page 247
3-2. Using the audio system NOTICE CDs with a transparent or translucent ● recording area. CDs that have had tape, stickers or CD-R ● labels attached to them, or that have had the label peeled off. CD player precautions ■ Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
3-2. Using the audio system Playing back MP3 and WMA discs Type A Playback/Pause Folder selection Repeat play Displays text message Random playback Silencing a sound File selection Power Volume CD selection File Playback CD load selection Search playback CD eject Type B Playback/Pause Folder selection...
Page 249
3-2. Using the audio system Loading and ejecting MP3 and WMA discs P. 242, 243 Selecting MP3 and WMA discs P. 244 Selecting a folder ■ Selecting folders one at a time Press () or () to select the desired folder. ■...
Page 250
3-2. Using the audio system Selecting and scanning files ■ Selecting one file at a time Turn or press “” or “” on to select the desired file. ■ Selecting the desired file by cueing the files in the folder (type A) Press When the desired file is reached, press once again.
Page 251
“WAIT”: Operation is stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Lexus dealer if the CD still cannot be played back. “NO MUSIC”: This indicates that the MP3/WMA file is not included in the CD.
Page 252
3-2. Using the audio system Discs that can be used ■ Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration. CD player protection feature ■...
Page 253
3-2. Using the audio system WMA file compatibility ● • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver.
Page 254
3-2. Using the audio system ID3 and WMA tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 255
3-2. Using the audio system NOTICE CDs and adapters that cannot be used ■ P. 246 CD player precautions ■ P. 247...
3-2. Using the audio system Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod Open the cover and connect STEP the portable audio device. Turn on the power of the iPod if it is not turned on.
Page 257
3-2. Using the audio system ■ Control panel Type A Repeat play Playback/Pause Go back Shuffle playback Displays text message Silencing a sound iPod menu/ Song selection Song selection Power Volume Song selection Playback...
Page 258
3-2. Using the audio system Type B Repeat play Playback/Pause Go back Shuffle playback Displays text message Silencing a sound iPod menu/ Song selection Song selection Power Volume Song selection Playback Selecting a play mode Press to select iPod menu mode. STEP Pressing changes the play mode in the following...
Page 259
3-2. Using the audio system ■ Play mode list First Second Third Fourth Play mode selection selection selection selection “PLAYLISTS” Playlists select Songs select “ARTISTS” Artists select Albums select Songs select “ALBUMS” Albums select Songs select “SONGS” Songs select “PODCASTS” Albums select Songs select “GENRES”...
Page 260
3-2. Using the audio system Selecting songs Turn or press “” or “” on to select the desired song. Playing and pausing songs To play or pause a song, press Fast-forwarding and rewinding songs To fast-forward or rewind, press and hold “” or “” on until you hear a beep.
Page 261
3-2. Using the audio system Adjusting sound quality and volume balance Press to enter iPod menu mode. STEP Pressing changes sound modes. (P. 274) STEP About iPod ■ Apple is not responsible for the operation of this device or its compliance with ●...
Page 262
3-2. Using the audio system Canceling shuffle and repeat playback ■ Press (RAND) or (RPT) again. Error messages ■ “ERROR”: This indicates a problem in the iPod or its connection. “NO MUSIC”: This indicates that there is no music data in the iPod. “EMPTY”: This indicates that some available songs are not found in a selected play- list.
Page 263
3-2. Using the audio system CAUTION Caution while driving ■ Do not connect iPod or operate the controls. NOTICE To prevent damage to iPod ■ Do not leave iPod in the vehicle. The temperature inside the vehicle may become ● high, resulting in damage to the player.
3-2. Using the audio system Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the cover and connect STEP the portable audio device. Turn on the power of the USB memory if it is not turned on.
Page 265
3-2. Using the audio system ■ Control panel Type A Playback/Pause Folder selection Repeat play Displays text message Random playback Silencing a sound File selection Power Volume Search playback File selection Playback...
Page 266
3-2. Using the audio system Type B Playback/Pause Folder selection Repeat play Displays text message Random playback Silencing a sound File selection Power Volume Playback File selection Selecting a folder ■ Selecting folders one at a time Press () or () to select the desired folder.
Page 267
3-2. Using the audio system Selecting files ■ Selecting one file at a time Turn or press “” or “” on to select the desired file. ■ Selecting the desired file by cueing the files in the folder (type A) Press When the desired file is reached, press once again.
Page 268
3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT). ■ Repeating all the files in a folder Press and hold (RPT) until you hear a beep. Switching the display Press Each time is pressed, the display changes in the order of Elapsed time ...
Page 269
3-2. Using the audio system Error messages ■ “ERROR”: This indicates a problem in the USB memory or its connection. “NO MUSIC”: This indicates that no MP3/WMA files are included in the USB memory. USB memory ■ Compatible devices ● USB memory that can be used for MP3 and WMA playback Compatible device formats ●...
Page 270
3-2. Using the audio system MP3 file compatibility ● • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz) •...
Page 271
3-2. Using the audio system MP3 and WMA playback ● • When a device containing MP3 or WMA files is connected, all files in the USB memory are checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recom- mend that you do not include any files other than MP3 or WMA files or cre- ate any unnecessary folders.
Page 272
3-2. Using the audio system NOTICE To prevent damage to USB memory ■ Do not leave USB memory in the vehicle. The temperature inside the vehicle may ● become high, resulting in damage to the player. Do not push down on or apply unnecessary pressure to the USB memory while it ●...
3-2. Using the audio system Optimal use of the audio system Adjusting the sound quality Adjusting the ASL Changing the sound quality modes...
Page 274
3-2. Using the audio system Adjusting the Automatic Sound Levelizer (ASL) Press The ASL switches between on and off modes each time pressed. ASL automatically adjusts the volume and tone quality according to the noise level as you drive your vehicle. Adjusting sound quality and volume balance ■...
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Open the cover and connect STEP the portable audio device. Type A Press STEP Type B...
Page 276
3-2. Using the audio system Operating portable audio devices connected to the audio system ■ The volume can be adjusted using the vehicle's audio controls. All other adjust- ments must be made on the portable audio device itself. When using a portable audio device connected to the power outlet ■...
3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Turns the power on, selects an audio source Increases/decreases volume Radio mode: Selects a radio station CD mode: Selects a track, file (MP3 and WMA) and disc...
Page 278
3-2. Using the audio system Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time is pressed. If no discs are inserted in the player, or if the external device is not connected, that mode will be skipped.
Page 279
3-2. Using the audio system Selecting an album ® Press to select Bluetooth audio mode. STEP Press and hold “” or “” on until you hear a beep. STEP Selecting a folder Press to select USB memory mode. STEP Press and hold “” or “” on until you hear a beep.
® 3-3. Using the Bluetooth audio system ® Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a por- table digital audio player (portable player) from the vehicle speakers via wireless communication. ® This audio system supports Bluetooth , a wireless data system capable of playing portable audio music without cables.
Page 281
® 3-3. Using the Bluetooth audio system When transferring ownership of the vehicle ■ Be sure to initialize the system to prevent personal data from being improperly accessed. (P. 322) ® About Bluetooth ■ Bluetooth is a registered trademark of Bluetooth SIG.
Page 282
® 3-3. Using the Bluetooth audio system CAUTION FCC WARNING ■ Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio fre- quency (RF) Exposure Guidelines in Supplement C to OET65.
® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system ■ Audio unit Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed. Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu...
Page 284
® 3-3. Using the Bluetooth audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, voice ® commands enable the operation of the Bluetooth audio system without the need to check the display or operate ■...
Page 285
® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register a ® Bluetooth enabled portable player in the system. Follow the procedure below to register (pair) a portable player: Press and select “BT•A MENU”...
Page 286
® 3-3. Using the Bluetooth audio system Guidance for registration completion is heard. ® If the portable player has a Bluetooth phone, the phone can be regis- tered at the same time. A voice guidance instruction to register a Blue- ®...
Page 287
® 3-3. Using the Bluetooth audio system When using a voice command ■ For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. Situations in which the system may not recognize your voice ■...
® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Type A Playback/Pause Album selection Repeat play Displays text message Random playback BT•A menu Power Volume Search playback Track selection Playback...
® 3-3. Using the Bluetooth audio system Type B Playback/Pause Album selection Repeat play Displays text message Random playback BT•A menu Power Volume Playback Track selection Selecting an album To select the desired album, press () or (). Selecting tracks Press “”...
Page 290
® 3-3. Using the Bluetooth audio system Fast-forwarding and rewinding tracks To fast-forward or rewind, press and hold “” or “” on until you hear a beep. Random playback Press (RAND). Repeat play Press (RPT). Scanning tracks (type A) Press Switching the display Press Each time...
Page 291
® 3-3. Using the Bluetooth audio system ® Bluetooth audio system functions ■ Depending on the portable player that is connected to the system, certain functions may not be available. Display ■ Up to 12 characters can be displayed at a time. If there are 13 characters or more, pressing and holding until you hear a beep will display the remaining characters.
® 3-3. Using the Bluetooth audio system ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for registered por- table players: ■...
Page 293
® 3-3. Using the Bluetooth audio system Pattern B Press to select “BT•A MENU”. STEP Press the talk switch or select “BT•A Setup” using STEP Select one of the following functions using a voice command STEP ● Registering a portable player “Pair Audio Player (Pair Audio)”...
Page 294
® 3-3. Using the Bluetooth audio system Selecting a portable player to be used Select “Connect Audio Player (Connect)” using a voice com- STEP mand or Pattern A Select the portable player to be used by either of the following STEP methods, and select “Confirm”...
Page 295
® 3-3. Using the Bluetooth audio system Changing the registered name of a portable player Select “Change Name” using a voice command or STEP Pattern A Select the name of the portable player to be changed by either of STEP the following methods, and select “Confirm”...
Page 296
® 3-3. Using the Bluetooth audio system Listing the registered portable players Select “List Audio Players (List Audios)” using a voice command or . The list of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:...
Page 297
® 3-3. Using the Bluetooth audio system Deleting a registered portable player Select “Delete Audio Player (Delete Audio)” using a voice com- STEP mand or Pattern A Select the portable player to be deleted by either of the following STEP methods and select “Confirm”...
® 3-3. Using the Bluetooth audio system ® Bluetooth audio system setup ■ System setup items and operation procedures Pattern A To enter the menu for each function, follow the steps below using a voice command or (P. 320) Pattern B Press to select “BT•A MENU”.
3-4. Using the hands-free phone system (for mobile phones) Hands-free system for mobile phones The hands-free system is a function that allows you to use your mobile phone without touching it. ® ® This system supports Bluetooth mobile phones. Bluetooth is a wireless data system that allows the mobile phone to wirelessly connect to the hands-free system and make/receive calls.
Page 300
3-4. Using the hands-free phone system (for mobile phones) Conditions under which the system will not operate ■ ® If using a mobile phone that does not support Bluetooth ● If the mobile phone is switched off ● If you are outside service range ●...
Page 301
3-4. Using the hands-free phone system (for mobile phones) Compatible models ■ Compatible with HFP (Hands Free Profile) Ver. 1.0 or higher (Conformed: Ver. 1.5) and OPP (Object Push Profile) Ver. 1.1. ® If your mobile phone does not support HFP, you cannot enter the Bluetooth ®...
Page 302
3-4. Using the hands-free phone system (for mobile phones) NOTICE To prevent damage to mobile phones ■ Do not leave mobile phones in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the phone.
3-4. Using the hands-free phone system (for mobile phones) Using the hands-free system (for mobile phones) ■ Audio unit Display A message, name, phone number, etc. is displayed. Lower-case characters and special characters cannot be displayed. Displays information that is too long to be displayed at one time on the display (press and hold)
Page 304
3-4. Using the hands-free phone system (for mobile phones) ■ Steering wheel switches Volume During an incoming call: Adjusts the ring tone volume During an ongoing call: Adjusts the receiver volume The voice guidance volume can- not be adjusted using this but- ton.
Page 305
3-4. Using the hands-free phone system (for mobile phones) Operating the system using voice commands By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone system without the need to check the display or operate ■...
Page 306
3-4. Using the hands-free phone system (for mobile phones) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a mobile phone in the system. The system will enter phone registration mode automatically when starting the system with no mobile phone reg- istered.
Page 307
3-4. Using the hands-free phone system (for mobile phones) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in the “Callback” incoming call history memory Dialing a number stored in the “Redial”...
Page 308
3-4. Using the hands-free phone system (for mobile phones) Second First menu Third menu Operation detail menu “Set PIN” Setting a PIN code “Security” “Phbk Lock” Locking the phone book “Phbk Unlock” Unlocking the phone book Registering the mobile phone “Pair Phone”...
Page 309
3-4. Using the hands-free phone system (for mobile phones) ■ Short cut key operation First menu Second menu Operation detail Dialing a name registered in the “Dial XXX (name)” phone book “Phone book add Adding a new phone number Entry” “Phone book Change Changing a registered name in name”...
Page 310
3-4. Using the hands-free phone system (for mobile phones) Automatic volume adjustment ■ When vehicle speed reaches 50 mph (80 km/h) or more, the volume automati- cally increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command ■...
3-4. Using the hands-free phone system (for mobile phones) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 312
3-4. Using the hands-free phone system (for mobile phones) Dialing by inputting a number Press the talk switch and say “Dial by number”. STEP Press the talk switch and say the phone number. STEP Dial by one of the following methods: STEP a.
Page 313
3-4. Using the hands-free phone system (for mobile phones) When receiving a phone call ■ Answering a phone call Press the off-hook switch. ■ Refusing a phone call Press the on-hook switch. Transferring a phone call A call can be transferred between the mobile phone and system while dialing, receiving a call, or during a call.
Page 314
3-4. Using the hands-free phone system (for mobile phones) Using the call history memory Follow the procedure below to use a number stored in the call history memory: Press the talk switch and say “Redial” (when using a number STEP stored in the outgoing call history memory) or “Call back”...
3-4. Using the hands-free phone system (for mobile phones) Setting a mobile phone Registering a mobile phone in the hands-free phone system allows the sys- tem to function. The following functions can be used for registered mobile phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a voice command or ●...
Page 316
3-4. Using the hands-free phone system (for mobile phones) Selecting a mobile phone to be used Select “Connect Phone (Connect)” using a voice command or STEP Pattern A Select the mobile phone to be used by either of the following STEP methods, and select “Confirm”...
Page 317
3-4. Using the hands-free phone system (for mobile phones) Changing the registered name of a mobile phone Select “Change Name” using a voice command or STEP Pattern A Select the name of the mobile phone to be changed by either of STEP the following methods, and select “Confirm”...
Page 318
3-4. Using the hands-free phone system (for mobile phones) Listing the registered mobile phones Select “List Phones” using a voice command or The list of registered mobile phones will be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a mobile phone is being read aloud selects the mobile phone, and the following functions will become available:...
Page 319
3-4. Using the hands-free phone system (for mobile phones) Deleting a registered mobile phone Select “Delete Phone” using a voice command or STEP Pattern A Select the mobile phone to be deleted by either of the following STEP methods and select “Confirm” using a voice command or a.
3-4. Using the hands-free phone system (for mobile phones) Security and system setup ■ Security setting items and operation procedures To enter the menu for each function, follow the steps below using a voice command or ● Setting or changing the PIN (Personal Identification Number) 1.
Page 321
3-4. Using the hands-free phone system (for mobile phones) Setting or changing the PIN ■ Setting a PIN Select “Set PIN” using a voice command or STEP Enter a PIN using a voice command or STEP When using , input the code 1 digit at a time. ■...
Page 322
3-4. Using the hands-free phone system (for mobile phones) Setting voice guidance volume Select “Guidance Vol” using STEP Change the voice guidance volume using STEP ® Displaying the Bluetooth device address and name Select “Device Name” using STEP ® Press to display the Bluetooth device address STEP...
Page 323
3-4. Using the hands-free phone system (for mobile phones) Initialization ■ The following data in the system can be initialized: ● • Phone book • Outgoing and incoming call history • Speed dials • Registered mobile phone data • Security code ®...
3-4. Using the hands-free phone system (for mobile phones) Using the phone book To enter the menu for each function, follow the steps below using a voice command or ● Adding a new phone number 1. “Phonebook” 2. “Add Entry” ●...
Page 325
3-4. Using the hands-free phone system (for mobile phones) ■ Adding procedure Select “Add Entry” using a voice command or STEP Use one of the following methods to input a telephone number: STEP Inputting a telephone number using a voice command: STEP2-1 Select “By Voice”...
Page 326
3-4. Using the hands-free phone system (for mobile phones) Inputting a phone number using STEP2-1 Select “Manual Input” using STEP2-2 Input a phone number using and press again. Input the phone number 1 digit at a time. Selecting a phone number from the outgoing or incoming call history: STEP2-1 Select “Call History”...
Page 327
3-4. Using the hands-free phone system (for mobile phones) Changing the registered name in the phone book Select “Change Name” using a voice command or STEP Pattern A Select the name to be changed by either of the following meth- STEP ods, and select “Confirm”...
Page 328
3-4. Using the hands-free phone system (for mobile phones) Setting speed dials Select “Set Speed Dial (Speed Dial)” using a voice command or STEP Pattern A Select the data to be registered as a speed dial by either of the STEP following methods and select “Confirm”...
Page 329
3-4. Using the hands-free phone system (for mobile phones) Deleting the registered data Select “Delete Entry” using a voice command or STEP Pattern A Select the data to be deleted by either of the following methods STEP and select “Confirm” using a voice command or a.
3-5. Using the interior lights Interior lights list Your Lexus is equipped with the illuminated entry system to assist in enter- ing the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off according to the presence of the electronic key, whether the doors are locked/unlocked, whether the doors are opened/closed, and the “ENGINE START STOP”...
Page 331
(door position on/off) is on, the lights will go off automatically after 20 minutes. Customization that can be configured at Lexus dealer ■ Settings (e.g. The time elapsed before lights turn off) can be changed.
3-5. Using the interior lights Interior lights and personal lights Interior lights Models without a moon roof Door position on/off On/off Models with a moon roof Door position on/off On/off Personal lights Front (models without a moon roof) On/off...
Page 333
3-5. Using the interior lights Personal lights Front (models with a moon roof) On/off Rear On/off...
3-6. Using the storage features List of storage features Overhead console Glove box Bottle holders/door pockets Cup holders Console box/cup holder Auxiliary box (if equipped) CAUTION Items that should not be left in the storage spaces ■ Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: Glasses may be deformed by heat or cracked if they come into contact with ●...
3-6. Using the storage features Glove box and console box Glove box Open (push button) Lock with the mechanical key Unlock with the mechanical key Glove box light ■ The glove box light turns on when the “ENGINE START STOP” switch is in IGNI- TION ON mode.
3-6. Using the storage features Console box and overhead console Console box light ■ The console box light turns on when the “ENGINE START STOP” switch is in IGNITION ON mode. Using the console box to store CD cases ■ Store a CD case with the hinged portion fac- ing either the front or back of the console box.
3-6. Using the storage features Overhead console and cup holders CAUTION Caution while driving ■ Do not leave the overhead console open while driving. Items may fall out and cause death or serious injury in case of an accident or sudden stop.
Page 338
3-6. Using the storage features Cup holders Rear Press in and release the cup hold- ers on the rear center armrest. Using the front cup holder (slide type) to store small items ■ Remove the cup holder insert by holding the base part.
3-6. Using the storage features Bottle holders/door pockets and auxiliary box Bottle holders/door pockets The door pockets can be opened and closed. When installing the bottle, close the cap of the bottle. CAUTION Caution while driving ■ Keep the door pockets closed. Injuries may result in the event of an accident or sudden braking.
3-7. Other interior features Clock Adjusts the hour. Adjusts the minutes. Rounds to the nearest hour. : e.g. 1:00 to 1:29 1:00 1:30 to 1:59 2:00 The clock is displayed when ■ The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
3-7. Other interior features Satellite switches The satellite switches can be used to change the settings of various fea- tures. Settings are shown on the multi-information display. ■ Operating the satellite switches Bring up satellite switch mode STEP on the multi-information display. ...
Page 344
3-7. Other interior features Change the settings. STEP Press the “ON/OFF” button to change the settings (e.g. on/off). ■ Items that can be set using the satellite switches Intuitive parking assist (P. 191) on/off (if equipped) Tire pressure warning system initialization (P.
Page 345
3-7. Other interior features Changing the settings ■ Each item is displayed and its setting can be changed only in the following condi- tions: Intuitive parking assist: When the “ENGINE START STOP” switch is in IGNI- ● TION ON mode. Items other than the above: When the “ENGINE START STOP”...
3-7. Other interior features Ashtrays Front Push the back part of the lid to open. Push the lid again to close. Push the lever to remove the ashtray. Rear Pull the ashtray lid to open. Hold the plate down and pull the ashtray upwards to remove.
3-7. Other interior features Cigarette lighter Push the back part of the lid to open, and push the cigarette lighter down. The cigarette lighter will pop up when it is ready for use. The cigarette lighter can be used when ■...
3-7. Other interior features Power outlet The power outlet can be used for 12 V accessories that run on less than 10 The power outlet can be used when ■ The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. NOTICE To avoid damaging the power outlet ■...
3-7. Other interior features Seat heaters Heats the seats Front passenger’ s The indicator light comes on. Driver’ s seat seat The higher the number, the warmer the seats become. The seat heaters can be used when ■ The “ENGINE START STOP” switch is in IGNITION ON mode. When not in use ■...
Page 350
3-7. Other interior features CAUTION Burns ■ Use caution when seating the following persons in a seat with the seat heater on ● to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
3-7. Other interior features Armrest Pull the armrest down for use. NOTICE To prevent damage to the armrest ■ Do not place too much strain on the armrest.
3-7. Other interior features Trunk storage extension Long objects can be loaded in the vehicle by utilizing the trunk space and rear seat area. Pull down the armrest. STEP Lift up the trunk door cover. STEP Open the inside trunk door STEP from the trunk and load bag- gage or other items.
Page 353
3-7. Other interior features CAUTION When not in use ■ Ensure that the inside trunk door is closed. In the event of sudden braking, items stored in the trunk may be thrown forward into the cabin, resulting in injury.
3-7. Other interior features Coat hooks To use the coat hook, push it in. CAUTION Items that must not be hung on the hook ■ Do not hang a coat hanger or other hard or sharp object on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury.
■ Do not use floor mats designed for other models or different model year vehicles, ● even if they are Lexus Genuine floor mats. Only use floor mats designed for the driver's seat. ● Always install the floor mat securely using the retaining hooks (clips) provided.
3-7. Other interior features Trunk features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Shopping bag hooks ■ First-aid kit storage belt Loosen Tighten...
Page 357
3-7. Other interior features ■ Warning triangle storage belt Loosen Tighten ■ Luggage mat Pull the lever upwards when lift- ing the luggage mat up. The lever can be hooked on the edge of the trunk.
Page 358
3-7. Other interior features CAUTION When the cargo hooks are not in use ■ To avoid injury, always return the cargo hooks to their positions when they are not in use. NOTICE When closing the trunk ■ Do not leave the luggage mat lever hooked on the edge of the trunk. The luggage mat may get damaged.
3-7. Other interior features Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. The garage door opener (HomeLink Universal Transceiver) is manufactured ...
Page 360
3-7. Other interior features Press and hold one of the STEP HomeLink buttons and the trans- mitter button. When HomeLink indicator light changes from a slow to a rapid flash, you can release both buttons. If the HomeLink indicator light comes on but does not flash, or flashes rapidly for 2 seconds...
Page 361
3-7. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the heading “Programming the HomeLink ” before proceeding with the steps listed below. Locate the learn button on the ceiling mounted garage door STEP opener motor.
Page 362
HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Lexus dealer for assistance. ■ Reprogramming a button The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 363
3-7. Other interior features Erasing the entire HomeLink memory (all three programs) Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light flashes. If you sell your vehicle, be sure to erase the programs stored in the ...
Page 364
3-7. Other interior features When support is necessary ■ Visit on the web at www.homelink.com or call 1-800-355-3515. CAUTION When programming a garage door or other remote control device ■ The garage door on other devices may operate, so ensure people and objects are out of danger to prevent potential harm.
3-7. Other interior features Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, push the switch. ■ Displays and directions Display Direction North Northeast...
Page 366
3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’ s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will devi- ate.
Page 367
3-7. Other interior features ■ Circling calibration When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
Page 368
3-7. Other interior features CAUTION While driving the vehicle ■ Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. When doing the circling calibration ■ Be sure to secure a wide space, and watch out for people and vehicles in the neigh- borhood.
Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is avail- able at Lexus.com. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
Page 370
After you have signed the Telematics Subscription Service Agree- ment and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Lexus dealer, call 1-800-25-LEXUS (1-800-255-3987) or push the “SOS” button in your vehicle for further subscription details.
Page 371
● ing Safety Connect. Safety Connect is available beginning Fall 2009 on select Lexus models. Con- ● tact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection availability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
Page 372
● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunction (contact your Lexus dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services ■...
Page 373
After filing a police report, call the Safety Connect response center at 1-800-25- LEXUS (1-800-255-3987) and follow the prompts for Safety Con- nect to initiate this service. In addition to assisting law enforcement with recovery of a stolen vehi- cle, Safety-Connect-equipped vehicle location data may, under cer- tain circumstances, be shared with third parties to locate your vehicle.
Page 374
3-7. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio fre- quency (RF) signals.
Page 375
4, 9 01,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338 Certification for Lexus Enform with Safety Connect ■ FCC ID: O9EGTM1 FCC ID: O6Y-CDMRF101 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-...
Page 377
Maintenance and care 4-1. Maintenance and care 4-3. Do-it-yourself maintenance Cleaning and protecting the vehicle exterior..... 378 Do-it-yourself service precautions......390 Cleaning and protecting the vehicle interior....381 Hood.......... 393 Positioning a floor jack ..394 4-2. Maintenance Engine compartment ... 396 Maintenance Tires..........
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condi- tion. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 379
4-1. Maintenance and care Aluminum wheels ■ Remove any dirt immediately by using a neutral detergent. Do not use hard ● brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. Do not use detergent on the wheels when they are hot, for example after driving ●...
Page 380
4-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and components (alu- ■ minum wheels etc.) Wash the vehicle immediately in the following cases: ● • After driving near the sea coast • After driving on salted roads •...
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
4-1. Maintenance and care Caring for leather areas ■ Lexus recommends cleaning the interior of the vehicle at least twice a year to main- tain the quality of the vehicle’ s interior. Shampooing the carpets ■ There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
4-1. Maintenance and care NOTICE Cleaning detergents ■ Do not use organic substances such as benzene or gasoline, acidic or alkaline ● solutions, dye, bleach or other detergent. Doing so may discolor the vehicle inte- rior or cause streaks or damage to painted surfaces. Do not use polish wax or polish cleaner.
It is recommended that genuine Lexus parts be used for repair to ensure perfor- mance of each system. If non-Lexus parts are used in replacement or if a repair shop other than a Lexus dealer performs repairs, confirm the warranty coverage.
Page 385
Allow inspection and repairs to be performed by a Lexus dealer ■ Lexus technicians are well-trained specialists and are kept up to date with the ● latest service information. They are well informed about the operations of all systems on your vehicle.
“Warranty and Services Guide” or “Owners Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Lexus dealer or qualified service shop for advice. Engine compartment...
4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? Brake pedal •...
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Lexus dealer to service the vehicle. ■...
4-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance yourself, be sure to follow the correct proce- dure as given in these sections. Items Parts and tools • Warm water • Baking soda Battery condition ( P. 406 ) •...
Page 391
4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent Engine oil level (P. 399) • Rag or paper towel, funnel (used only for adding engine oil) • Fuse with same amperage rating as Fuses (P. 431) original Headlight aim (P.
Page 392
4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move sud- denly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment: ■ Keep hands, clothing, and tools away from the moving fan and engine drive belt.
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever and STEP lift the hood. CAUTION Pre-driving check ■...
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ■ Front Jack point Oil pan *: Take care when positioning a floor jack, as it is easy to mistake the engine oil pan for the jack point.
Page 395
4-3. Do-it-yourself maintenance CAUTION When raising your vehicle: ■ Make sure to observe the following to reduce the possibility of death or serious injury. Lift up the vehicle using a floor jack such as ● the one shown in the illustration. When using a floor jack, follow the instructions of the manual provided with the ●...
Page 397
4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover Front Outside *: Using a tool, turn the nut until the engine compartment cover can be removed.
Page 398
4-3. Do-it-yourself maintenance ■ Installing the clips and nut Press the tip of the clip against a hard surface, such as a desk, to allow the center part of the clip to be pushed up. Insert *: Push it down as far as it will go. Press NOTICE After installing an engine compartment cover...
Page 399
4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engine STEP and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 400
4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 401
● pose of used oil and filters in household trash, in sewers or onto the ground. Call your Lexus dealer, service station or auto parts store for information con- cerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 402
4-3. Do-it-yourself maintenance NOTICE To prevent serious engine damage ■ Check the oil level on a regular basis. When replacing the engine oil ■ Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ●...
Page 403
If the coolant level drops within a short time after replenishing ■ Visually check the radiator, hoses, coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Lexus dealer test the cap and check for leaks in the cooling system. Coolant selection ■...
Page 404
Check the radiator and condenser, and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Lexus dealer. CAUTION When the engine is hot ■...
Page 405
4-3. Do-it-yourself maintenance ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items Clean funnel Brake fluid can absorb moisture from the air ■...
Page 406
4-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Ground cable ■ Checking battery fluid Check that the level is between “UPPER LEVEL”...
Page 407
Open and close any of the doors. STEP Start the engine. (If the engine does not start first time, repeat the proce- STEP dure.) If the engine will not start even after multiple attempts at the above method, contact your Lexus dealer.
Page 408
4-3. Do-it-yourself maintenance CAUTION Chemicals in the battery ■ A battery contains poisonous and corrosive sulfuric acid and may produce hydro- gen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 409
4-3. Do-it-yourself maintenance NOTICE When recharging the battery ■ Never recharge the battery while the engine is running. Also, be sure all accesso- ries are turned off. Washer fluid If any washer does not work or the warning message appears on the multi-information display, washer tank may be empty.
■ The tire pressure warning system Your Lexus is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire infla- tion pressure before serious problems arise. (P. 466, 475)
Page 411
4-3. Do-it-yourself maintenance Initializing the tire pressure warning system ■ The tire pressure warning system must be initialized when the tire inflation pressure is changed (such as when changing traveling speed.) When the tire pressure warning system is initialized, the current tire inflation pressure is set as the benchmark pressure.
Page 412
4-3. Do-it-yourself maintenance The tire inflation pressure initial- STEP ization setting display Continue to press “ ” or “ ” until the initialization setting display appears. It may take several minutes to com- plete the setting. Wait for several minutes before turning...
Page 413
“2ND” position: The ID code is not registered. When you replace a new set of tires, purchase tire pressure warning valves and transmitters from your Lexus dealer and have the new ID code registered by your Lexus dealer.
Page 414
4-3. Do-it-yourself maintenance ■ Selecting ID codes When replacing tires, make sure to select the ID code set that matches the new tire set. If the ID code is set to the wrong tire setting, the tire pressure warning system will not operate properly. After driving for about 20 minutes, the tire pressure warning light comes on after blink- ing for 1 minute to indicate a system malfunction.
Page 415
A tire goes flat repeatedly or cannot be properly repaired due to the size or ● location of a cut or other damage If you are not sure, consult with your Lexus dealer. Replacing tires and wheels ■ If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 416
4-3. Do-it-yourself maintenance Maximum load of tire ■ Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, which- ever is greater. For the GAWR, see the Certification Label.
Page 417
If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Lexus dealer. When operating the tire pressure warning reset switch, the tire pressure warn- ●...
Page 418
Do not mix tires of different makes, models or tread patterns. Also, do not mix ● tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Lexus. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 419
When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Lexus dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (P. 521)
Page 421
4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not within the recommended lev- STEP...
Page 422
Reduced safety ● Damage to the drive train ● If a tire needs frequent refilling, have it checked by your Lexus dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 423
4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear ● Uneven wear ● Poor handling ●...
When replacing wheels ■ The wheels of your Lexus are equipped with tire pressure warning valves and trans- mitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire...
Page 425
Because tire repair or replacement may affect the tire pressure warning valves ● and transmitters, make sure to have tires serviced by your Lexus dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Lexus dealer.
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to main- tain air conditioning efficiency. ■ Removal method Set the air conditioning system to recirculated mode. STEP (P. 220) The air conditioning filter case cannot be removed with the system in the outside air mode.
Page 427
2 minutes at 72 psi (500 kPa, 5.0 kgf/cm or bar). If it is not available, have the filter cleaned by your Lexus dealer. ■ Replacement method Remove the air conditioning fil- ter from the filter case and replace it with a new one.
Page 428
4-3. Do-it-yourself maintenance NOTICE To prevent damage to the system ■ When using the air conditioning system, make sure that a filter is always installed. ● When cleaning the filter, do not clean the filter with water. ●...
4-3. Do-it-yourself maintenance Electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver ● Small Phillips-head screwdriver ● Lithium battery (CR1632) ■ Replacing the battery Take out the mechanical key. STEP Remove the cover.
Page 430
● When the card key battery needs to be replaced (Canada only) ■ The battery for the card key is available only at Lexus dealers. Your Lexus dealer can replace the battery for you. CAUTION Removed battery and other parts ■...
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “ENGINE START STOP” switch to OFF. STEP Engine compartment (type B): Remove the engine compart- STEP ment cover.
Page 432
4-3. Do-it-yourself maintenance Driver's side instrument panel Remove the lid. Passenger's side instrument panel Remove the lid. After a system failure, see “Fuse layout and amperage ratings” STEP (P. 435) for details about which fuse to check. Remove the fuse with the pull- STEP out tool.
Page 433
Type B Normal fuse Blown fuse Replace it with one of an appro- priate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Lexus dealer.
Page 434
4-3. Do-it-yourself maintenance Type D Normal fuse Blown fuse Contact your Lexus dealer. Removing the front controller (engine compartment: type B) Lift the lid off while pushing the tabs on either side.
Page 435
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment (type A) Fuse Ampere Circuit ALT-S 7.5 A Charging system TURN-HAZ 15 A Emergency flashers, turn signals IG2 MAIN 20 A IG2, IGN, GAUGE RAD NO. 2 30 A Audio system D/C CUT 20 A...
Page 436
4-3. Do-it-yourself maintenance Fuse Ampere Circuit FR CTRL-B, ETCS, A/F, STR LOCK, E/G-B 60 A INJ2, TEL P/I-B 60 A EFI, F/PMP, INJ ABS 1 50 A VDIM RH J/B-B 30 A FR DOOR RH, RR DOOR RH, AM2 Multiport fuel injection system/ 40 A sequential multiport fuel injection sys- H-LP R LWR, H-LP L LWR, headlight...
Page 437
4-3. Do-it-yourself maintenance Fuse Ampere Circuit FAN2 40 A Electric cooling fans FAN1 40 A Electric cooling fans HEATER 50 A CDS, air conditioning system E/G-AM 60 A H-LP CLN, FR CTRL AM, DEICER...
Page 438
4-3. Do-it-yourself maintenance ■ Engine compartment (type B) Fuse Ampere Circuit SPARE 30 A Spare fuse SPARE 25 A Spare fuse SPARE 10 A Spare fuse FR CTRL-B 25 A HORN, H-LP HI 15 A Exhaust system Multiport fuel injection system/ ETCS 10 A sequential multiport fuel injection sys-...
Page 439
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 10 A Ignition system Fuel system, exhaust system, multiport EFI NO. 2 10 A fuel injection system/sequential multi- port fuel injection system H-LP R LWR 15 A Headlight low beam (right) H-LP L LWR 15 A Headlight low beam (left) F/PMP...
Page 440
4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel Fuse Ampere Circuit FR P/SEAT LH 30 A Power seat 7.5 A Air conditioning system MIR HTR 15 A Outside rear view mirror defoggers TV NO. 1 10 A Display FUEL OPEN 10 A Fuel filler door opener TV NO.
Page 441
4-3. Do-it-yourself maintenance Fuse Ampere Circuit FR S/HTR LH 15 A Seat heaters RR DOOR LH 20 A Power windows Power windows, outside rear view FR DOOR LH 20 A mirror (left) Smart access system with push-button SECURITY 7.5 A start H-LP LVL 7.5 A...
Page 442
4-3. Do-it-yourself maintenance ■ Passenger’s side instrument panel Fuse Ampere Circuit FR P/SEAT RH 30 A Power seat DOOR DL 15 A 7.5 A On-board diagnosis system Stop lights, VDIM, shift lock system, multiport fuel injection system/ STOP SW 7.5 A sequential multiport fuel injection sys- tem, smart access system with push- button start...
Page 443
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 15 A Cigarette lighter PWR OUTLET 15 A Power outlet RR DOOR RH 20 A Power windows Power windows, outside rear view FR DOOR RH 20 A mirrors Smart access system with push-button 7.5 A start Seat belts, intuitive parking assist, RH-IG...
Page 444
If the lights do not turn on even after the fuse has been replaced, a bulb may ● need replacement. (P. 447) If the replaced fuse blows again, have the vehicle inspected by your Lexus ● dealer. If there is an overload in the circuits ■...
4-3. Do-it-yourself maintenance Headlight aim ■ Removing the engine compartment cover. P. 397 ■ Vertical movement adjusting bolts Adjustment bolt A Adjustment bolt B ■ Before checking the headlight aim Make sure the vehicle has a full tank of gas and the area around STEP the headlight is not deformed.
Page 446
Turn bolt B the same number of STEP turns and in the same direction as step 1 using a Phillips-head screwdriver. If the headlight cannot be adjusted using this procedure, take the vehicle to your Lexus dealer to adjust the headlight aim.
4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. For more information about replacing other light bulbs, contact your Lexus dealer. ■ Preparing a replacement light bulb Check the wattage of the light bulb being replaced. (P. 522) ■...
Page 448
4-3. Do-it-yourself maintenance Partly remove the cover. Remove STEP the wire harness and turn the bulb base counterclockwise. Remove the light bulb. STEP ■ Rear turn signal lights Open the trunk door and remove STEP the cover. Remove the connector and turn STEP the bulb base counterclockwise.
Page 449
Remove the light bulb. STEP ■ Bulbs other than the above If any of the bulbs listed below has burnt out, have your Lexus dealer replace it. ● Headlight low and high beams (discharge bulbs) ● Headlight high beams ● Front fog lights ●...
Page 450
4-3. Do-it-yourself maintenance Condensation build-up on the inside of the lens ■ Contact your Lexus dealer for more information in the following situations. Tempo- rary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Large drops of water are built up on the inside of the lens.
Page 451
Doing so could result in electric shock and serious injury or death. Discharge headlights ■ Contact your Lexus dealer before replacing discharge headlights (including light ● bulbs). Do not touch the high-intensity discharge headlight’ s high voltage socket when ●...
Page 453
When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers....454 If a warning light turns If your vehicle needs to be on or a warning buzzer towed ........455 sounds........463 If you think something is If a warning message is wrong ........
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE To prevent battery discharge ■...
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Lexus dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/provincial and local laws.
Page 456
5-1. Essential information Emergency towing procedure ■ Release the parking brake. STEP Shift the shift lever to N. STEP Put the “ENGINE START STOP” switch in ACCESSORY mode (engine STEP off) or IGNITION ON mode (engine running). CAUTION Caution while towing ■...
Page 457
5-1. Essential information Installing the towing eyelet Remove the eyelet cover using a STEP flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration. Insert the towing eyelet into the STEP hole and tighten partially by hand.
Page 458
5-1. Essential information CAUTION Installing the towing eyelet to the vehicle ■ Make sure that the towing eyelet is installed securely. If not securely installed, the towing eyelet may come loose during towing. This may lead to accidents that cause serious injury or even death. Towing with a sling-type truck NOTICE To prevent body damage...
Page 459
5-1. Essential information Towing with a wheel lift-type truck From the front Use a towing dolly under the rear wheels. From the rear Turn the “ENGINE START STOP” switch to the ACCESSORY mode so that the steering wheel is unlocked. NOTICE To prevent causing serious damage to the transmission ■...
Page 460
5-1. Essential information Using a flat bed truck If your Lexus is transported by a flat bed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Lexus dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake system. Immediately stop the vehicle in a safe place and contact your Lexus dealer. Warning light...
Page 464
Charging system warning light Indicates a malfunction in the vehicle’ s charging system. Have the vehicle inspected by your Lexus dealer immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Lexus dealer immediately.
Page 465
5-2. Steps to take in an emergency Warning light Warning light/Details ABS warning light (U.S.A.) Indicates a malfunction in: • The ABS; or (Canada) • The brake assist system. Electric power steering system warning light Indicates a malfunction in the EPS (Electric Power Steering) system.
Page 466
5-2. Steps to take in an emergency CAUTION When the electric power steering system warning light comes on ■ The steering wheel may become extremely heavy. If the steering wheel becomes heavier than usual when operating, hold firmly and operate it using more force than usual. Follow the correction procedures.
Page 467
• Natural causes (P. 468) tire inflation pressure is • Flat tire (P. 487) adjusted, have the system checked by your Lexus dealer. When the light comes on after blinking for 1 minute: Have the system checked by Malfunction in the tire pres- your Lexus dealer.
Page 468
If it is, tighten it securely. The lamp will go off after taking several driving trips. If the lamp does not go off even after several trips, contact your Lexus dealer as soon as possible. Front passenger detection sensor and passenger seat belt reminder and warning ■...
Page 469
If there is a lot of snow or ice on the vehicle, in particular, around the wheels or ● wheel housings. If non-genuine Lexus wheels are used. (Even if you use Lexus wheels, the tire ● pressure warning system may not work properly with some types of tires.) If the tire pressure warning light frequently comes on after blinking for 1 minute ■...
Page 470
● ment, it is probable that you have a flat tire. Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Lexus dealer. Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could ●...
Page 471
5-2. Steps to take in an emergency CAUTION Maintenance of the tires ■ Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.)
Page 472
5-2. Steps to take in an emergency NOTICE Precaution when installing a different tire ■ When a tire of a different specification or maker is installed, the tire pressure warn- ing system may not operate properly.
Multi-information display If any of the warning lights turns on again after performing the follow- ing actions, contact your Lexus dealer.
Page 474
A buzzer sounds and a warning message is shown on the multi-informa- tion display. The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Lexus dealer. Warning message Details (for U.S.A.)
Page 475
5-2. Steps to take in an emergency Have the vehicle inspected by your Lexus dealer immediately. A buzzer sounds and a warning message is shown on the multi-informa- tion display. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident.
Page 476
5-2. Steps to take in an emergency Warning message Details Indicates an intuitive parking assist malfunction. The malfunctioning assist-sensor is shown flashing on the display. (If equipped) Indicates a malfunction in the radar cruise control (Flashing and then con- system. tinuously on) Press the “ON-OFF”...
Page 477
5-2. Steps to take in an emergency Follow the correction procedures. A buzzer sounds and a warning message is shown on the multi-informa- tion display. After taking the specified steps to correct the suspected problem, check that the warning message turns off. Warning message Details Correction procedure...
Page 478
5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the trunk is not fully closed. flashes and a buzzer sounds to indi- Close the trunk. cate that trunk is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]).
Page 479
5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the washer Add washer fluid. fluid level is low. Check the level of engine oil, and add if necessary. This message may appear if the vehicle is Indicates that engine oil stopped on a slope.
Page 480
5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that all mainte- nance is required to cor- respond to the driven distance on the mainte- nance schedule*. Perform the necessary maintenance. Please reset Comes on approximately the maintenance data 5000 miles (8000 km) after the maintenance is...
Page 481
5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the radar (Flashing and then con- cruise control sensor is Clean the sensor. tinuously on) dirty or covered with ice. (Flashing) (If equipped) • Switch the driving mode to either the normal or Indicates that the radar “Sport”...
Page 482
5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that there is a high possibility of a fron- Slow the vehicle by apply- tal collision, or that the ing the brakes. pre-collision braking (Flashing) function is operating. (If equipped) *: Refer to the separate “Scheduled Maintenance”...
Page 483
5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior Correction Exterior Warning message Details buzzer buzzer procedure Indicates that an attempt was made to start the engine without...
Page 484
5-2. Steps to take in an emergency Interior Correction Exterior Warning message Details buzzer buzzer procedure Indicates that the driver’s door has been opened and closed with the Turn the shift lever in P, the “ENGINE START “ENGINE START STOP” switch Once 3 times STOP”...
Page 485
5-2. Steps to take in an emergency Interior Correction Exterior Warning message Details buzzer buzzer procedure Indicates that the Replace the bat- Once (Comes on for 10 sec- key battery is low. tery. (P. 429) onds.) (Flashing) Indicates that the “ENGINE START STOP”...
Page 486
5-2. Steps to take in an emergency Interior Correction Exterior Warning message Details buzzer buzzer procedure Once Indicates that the electronic key P. 500 does not operate properly. Once *: If the engine does not start when the electronic key is inside the vehicle, the electronic key battery may be depleted or there may be difficulties receiving the signal from the key.
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare tire provided. The spare tire can only be used on the front wheels. ■ Before jacking up the vehicle ●...
Page 488
5-2. Steps to take in an emergency Taking out the spare tire Lift up the hook of the panel on the STEP trunk floor. Secure the panel using the hook STEP provided. Loosen the center fastener that STEP secures the spare tire.
Page 489
5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel chock Flat tire positions Behind the Left-hand rear right- side hand side tire Front Behind the Right- rear left- hand side hand side tire In front of the Left-hand front right-...
Page 490
5-2. Steps to take in an emergency Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and the STEP tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 491
5-2. Steps to take in an emergency Install the spare tire and loosely Tapered portion STEP tighten each wheel nut by hand by approximately the same amount. Tighten the nuts until the tapered portion comes into loose contact Disc wheel with the disc wheel seat.
Page 492
5-2. Steps to take in an emergency The compact spare tire ■ The compact spare tire is identified by the label “TEMPORARY USE ONLY” ● on the tire sidewall. Use the compact spare tire temporarily only in an emergency. Make sure to check the tire inflation pressure of the compact spare tire. ●...
Page 493
5-2. Steps to take in an emergency CAUTION Using the tire jack ■ Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. Do not use the tire jack for any purpose other than replacing tires. ●...
Page 494
5-2. Steps to take in an emergency CAUTION When using the compact spare tire ■ Remember that your compact spare tire is specifically designed for use with your ● vehicle. Do not use your compact spare tire on another vehicle. Do not use the compact spare tire as a rear tire.
Page 495
When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Lexus dealer or other qualified service shop as soon as possible. Make sure to replace the...
● There may be a malfunction in the engine immobilizer system. (P. 86) ● There may be a malfunction in the steering lock system. Contact your Lexus dealer if the problem cannot be repaired, or if repair procedures are unknown.
If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental opera- tion of the shift lever). Have the vehicle inspected by your Lexus dealer immediately.
5-2. Steps to take in an emergency If you lose your keys New genuine Lexus keys can be made by your Lexus dealer using the other key and the key number stamped on your key number plate. ( P. 28)
5-2. Steps to take in an emergency If the electronic key does not operate properly If communication between the electronic key and vehicle is interrupted (P. 36) or the electronic key cannot be used because the battery is depleted, the smart access system with push-button start and wireless remote control cannot be used.
Page 500
5-2. Steps to take in an emergency After the operation is completed, STEP reinstall the cover. Hook the upper claw of the cover onto the upper catch on the vehi- cle side, and then push on the lower side of the cover. Make sure that the lower claw of the cover is securely fastened to the lower catch on the vehicle side.
Page 501
To start the engine: Press the “ENGINE START STOP” switch within 10 seconds after the buzzer sounds, keeping the brake pedal depressed. In the event that the engine still cannot be started, contact your Lexus dealer. Stopping the engine ■...
You can call your Lexus dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your Lexus following the steps below. STEP Connecting the jumper cables.
Page 503
Once the vehicle’ s engine has started, remove the jumper STEP cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Lexus dealer as soon as possible. Starting the engine when the battery is discharged ■...
Page 504
5-2. Steps to take in an emergency CAUTION Avoiding battery fires or explosions ■ Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery. Make sure the jumper cable is connected to the correct terminal and that it is not ●...
Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fans are not operating: Stop the engine immediately and call your local Lexus dealer. After the engine has cooled...
Page 506
Water can be used in an emer- gency measure if engine coolant is unavailable. (P. 517) Have the vehicle checked at your nearest Lexus dealer as soon as pos- sible. Overheating ■ If you observe the following, your vehicle may be overheating.
Page 507
5-2. Steps to take in an emergency NOTICE When adding engine coolant ■ Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and shift the shift lever STEP to P.
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: Steadily step on the brake pedal with both feet and firmly STEP depress it.
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weight Overall length 183.4 in. (4660 mm) Overall width 71.4 in. (1815 mm) Overall height 55.7 in. (1415 mm) Wheelbase 107.4 in. (2730 mm) Front 61.4 in. (1560 mm) Tread 59.8 in.
Page 513
Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Lexus. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel and in the engine compartment.
Page 514
6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown.
Page 515
6-1. Specifications Engine Model 2UR-GSE Type 8-cylinder V type, 4-cycle, gasoline 3.70 3.52 in. (94.0 89.5 mm) Bore and stroke Displacement 303.2 cu. in. (4969 cm Drive belt tension Automatic adjustment Fuel Fuel type Unleaded gasoline only Octane rating 91 (Research octane number 96) or higher Fuel tank capacity 16.
Page 516
■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus approved “Toyota Genuine Motor Oil” or equivalent to satisfy the follow- ing grade and viscosity. Oil grade: ILSAC multigrade engine oil...
Page 517
6-1. Specifications Oil viscosity (5W-30 is explained here as an example): • The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Oil type and viscosity* LX 75W-85 GL-5” or equivalent : Your Lexus vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Lexus approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact...
Page 519
Fluid type Toyota Genuine ATF WS *: The fluid capacity is provided as a reference. If replacement is necessary, con- tact your Lexus dealer. NOTICE Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibra-...
Page 520
6-1. Specifications Brakes Pedal clearance 4.3 in. (110 mm) Min. Pedal free play 0.04 0.08 in. (1.0 2.0 mm) Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) Parking brake pedal travel ...
Page 521
6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels Front: 225/40R19 93Y Tire size Rear: 255/35R19 96Y Spare: T135/70R18 103M Front: 36 psi (250 kPa, 2.5 kgf/cm or bar)* Rear: 36 psi (250 kPa, 2.5 kgf/cm or bar)* Front and rear tire inflation pres- Spare:...
Page 522
6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights High beam 9005 Low/high beam Front turn signal lights Exterior Front fog lights Rear turn signal lights Back-up lights Outer foot lights Vanity lights Interior lights ...
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. Fuel tank opening for unleaded gasoline ■ To help prevent incorrect fueling, your Lexus has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks ■...
Page 524
10% ethanol). (85% ethanol) If you use gasohol in your Lexus, be sure that it has an octane rating no lower ● than 87. Lexus DOES NOT recommend the use of gasoline containing methanol.
Page 525
Some gasoline contains octane enhancing additive called MMT (Methylcyclopen- tadienyl Manganese Tricarbonyl). Lexus DOES NOT recommend the use of gasoline that contains MMT. If fuel con- taining MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this hap- pens, contact your Lexus dealer for service.
6-1. Specifications Tire information Typical tire symbols Standard tire Compact spare tire Tire size (P. 528) DOT and Tire Identification Number (TIN) (P. 528) Location of treadwear indicators (P. 410) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 527
6-1. Specifications Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
Page 528
6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 529
National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Lexus vehi- cles with information on uniform tire quality grading. Your Lexus dealer will help answer any questions you may have as you read this information.
Page 530
6-1. Specifications ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Require- ments in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A ■...
Page 531
6-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 532
6-1. Specifications Tire related term Meaning The weight of a motor vehicle with standard equip- ment, including the maximum capacity of fuel, oil and Curb weight coolant, and if so equipped, air conditioning and additional weight optional engine The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight...
Page 533
6-1. Specifications Tire related term Meaning The load on an individual tire that is determined by Vehicle maximum load on distributing to each axle its share of the maximum the tire loaded vehicle weight, and dividing by two The load on an individual tire that is determined by distributing to each axle its share of curb weight, Vehicle normal load on accessory weight, and normal occupant weight (dis-...
Page 534
6-1. Specifications Tire related term Meaning A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that encloses the rim flanges inside the air cavity of the tire A tire designed to operate at higher loads and at Extra load tire...
Page 535
6-1. Specifications Tire related term Meaning The rim on which a tire is fitted for physical dimension Measuring rim requirements Any parting at any junction of tread, sidewall, or Open splice innerliner that extends to cord material Outer diameter The overall diameter of an inflated new tire The linear distance between the exteriors of the side- Overall width walls of an inflated tire, including elevations due to...
Page 536
6-1. Specifications Tire related term Meaning Sidewall That portion of a tire between the tread and bead The parting of the rubber compound from the cord Sidewall separation material in the sidewall A tire that attains a traction index equal to or greater than 110, compared to the ASTM E-1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test...
Page 537
6-1. Specifications Designated seating Vehicle normal load, Occupant distribution in capacity, Number of Number of occupants a normally loaded vehicle occupants 2 through 4 2 in front 5 through 10 2 in front, 1 in second seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat...
Your vehicle includes a variety of electronic features that can be personal- ized to your preferences. Programming these preferences requires spe- cialized equipment and may be performed by an authorized Lexus dealership. Some function settings are changed simultaneously with other functions being customized.
Page 539
6-2. Customization Customized Item Function Default setting setting Operation signal (Emergency flashers) Operation signal (Buzzer) Wireless remote con- Door lock buzzer trol Trunk unlocking function P. 43) Push twice Trunk unlocking operation Push and hold One short push Panic function Driver's door unlocked in one All doors...
Page 540
6-2. Customization Customized Item Function Default setting setting Linked door lock opera- tion Power win- Open only Linked door key opera- dows Open and close tion Close only P. 76) Wireless remote control Open only linked operation Linked door lock opera- tion Open only Linked door key opera-...
Page 541
6-2. Customization Customized Item Function Default setting setting Switching operation when the vehicle is stationary Windshield Drip prevention function wipers and Variable washer Time elapsed before the depending on P. 168) drip prevention function 3 seconds the vehicle operates speed Back sensor operation display and buzzer...
Page 542
6-2. Customization Multi-information display (P. 157) Country Languages Canada English and French...
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference After reconnecting or changing the Power window P.
For owners Reporting safety defects for U.S. owners..... 546 Seat belt instructions for Canadian owners (in French) ......547 SRS airbag instructions for Canadian owners (in French) ......549...
National Highway Traffic Safety Administration (NHTSA) in addition to notifying the Lexus Division of Toyota Motor Sales, U.S.A., Inc. (Toll- free: 1-800-25-LEXUS). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 548
Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité...
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. Sacs de sécurité...
Page 550
Sacs de sécurité gonflables SRS latéraux et rideau Sacs de sécurité gonflables SRS latéraux Participent à la protection du haut du corps des occupants aux places avant. Sacs de sécurité gonflables rideau SRS Participe principalement à la protection de la tête des occupants.
Page 551
Composition du système de sacs de sécurité gonflables Sacs de sécurité gonflables de Contacteur de boucle de genoux ceinture sécurité conducteur Sac de sécurité gonflable passager avant Capteur de position du siège conducteur Sacs de sécurité gonflables rideau Contacteur de boucle de ceinture de sécurité...
Page 552
Votre véhicule est équipé de SACS DE SECURITE GONFLABLES INTELLIGENTS (ADVANCED AIRBAGS) conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le système de sacs de sécurité gonflables régule la puissance de déploiement des sacs de sécurité gonflables conducteur et passager avant.
Page 553
ATTENTION ■ Précautions à observer avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes avec les sacs de sécurité gonflables. À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité...
Page 554
être grièvement blessés ou tués par le déploiement d'un sac de sécurité gonflable. Installez les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité dans un siège de sécurité enfant. Lexus recommande vivement d'installer tous les nourrissons et enfants aux places arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
Page 555
ATTENTION ■ Précautions à observer avec les sacs de sécurité gonflables SRS ● Ne vous asseyez pas sur le bord du siège ou ne vous appuyez pas contre la planche de bord. ● Ne laissez pas un enfant rester debout devant le sac de sécurité...
Page 556
ATTENTION ■ Précautions à observer avec les sacs de sécurité gonflables SRS ● Ne fixez ni ne posez aucun objet sur le tableau de bord, la garniture centrale du moyeu de volant de direction ou la partie inférieure de la planche de bord. Au déploiement des sacs de sécurité...
Page 557
Si les parties renfermant les sacs de sécurité gonflables SRS, telles que la garniture du moyeu de volant et la garniture de montant avant, apparaissent abîmées ou craquelées, faites-les remplacer par votre concessionnaire Lexus. ■ Modification et mise au rebut des éléments du système de sacs de sécurité...
Page 559
Index Abbreviation list ....560 Alphabetical index....562 What to do if......573 For vehicles with a navigation system, refer to the “Naviga- tion System Owner’ s Manual” for information regarding the equipment listed below. • Navigation system • Audio/video system •...
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Anti-lock Brake System AI-SHIFT Artificial Intelligence Shift Automatic Locking Retractor Child Restraint System DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Rating Emission inspection and maintenance LATCH Lower Anchors and Tethers for Children Light Emitting Diode...
Page 561
Abbreviation list ABBREVIATIONS MEANING Vehicle Identification Number Vehicle Stability Control...
Alphabetical index Alphabetical index A/C* ............220 AUX port..........275 ® ABS.............. 197 Bluetooth audio ......280 ACCESSORY mode ......134 CD player/changer......241 iPod ............256 Air conditioning filter ......426 Air conditioning system MP3/WMA disc....... 248 Air conditioning filter ....... 426 Optimal use ..........273 Automatic air conditioning Portable music player......275 system..........220...
Page 563
Alphabetical index Brake Installing child restraints.....115 Fluid............404 Moon roof precautions......82 Parking brake........148 Power window lock switch....76 Brake assist..........197 Power window precautions ....78 Removed electronic key battery precautions........430 Care Seat belt comfort guide .....65 Exterior ........... 378 Seat belt extender precautions..69 Interior............381 Seat belt precautions ......68 Seat belts ..........
Page 564
Alphabetical index Daytime running light system ... 164 If the electronic key does not Defogger* operate properly......499 Rear window........228 If the engine will not start....496 Side mirrors..........228 If the shift lever cannot be Dimension..........512 shifted from P........497 Dinghy towing..........217 If the vehicle has a discharged Display...
Page 565
Alphabetical index Engine coolant temperature Fuel gauge............150 Capacity ..........515 Engine immobilizer system....86 Fuel gauge..........150 Engine oil Fuel pump shut off system.....462 Capacity...........516 Gas station information....576 Checking..........399 Information ..........523 Preparing and checking Refueling............83 before winter........214 Fuel door .............83 EPS............... 197 Fuel filler door ...........83 Event data recorder.........
What to do if... What to do if... A tire punctures If you have a flat tire P. 487 If the engine will not start P. 496 The engine does not start Engine immobilizer system P. 86 If the vehicle battery is discharged P.
Page 574
What to do if... A warning light or indicator If a warning light turns on or a warning P. 463 light comes on buzzer sounds... ■Warning lights Brake system warning light Malfunction indicator lamp P. 463 P. 464 Driver’s seat belt reminder ABS warning light light P.
Page 575
What to do if... SRS warning light Electric power steering system warning light P. 464 P. 464 Open door warning light Pre-collision system warn- ing light P. 466 P. 464 Charging system warning Tire pressure warning light light P. 464 P.
GAS STATION INFORMATION Auxiliary catch lever Trunk opener Fuel filler door P. 393 P. 50 P. 83 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 393 P. 83 P. 521 Fuel tank capacity 16. 9 gal. (64 L, 14.0 Imp. gal.) (Reference) Fuel type P.
Need help?
Do you have a question about the IS F 2012 and is the answer not in the manual?
Questions and answers