Erasing the entire HomeLink
Press and hold the 2 outside buttons for
10 seconds until the HomeLink
cator light changes from continuously
lit (orange) to rapidly flashing (green).
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
Codes stored in the HomeLink
■
The registered codes are not erased even if the battery cable is disconnected.
●
If learning failed when registering a different code to a HomeLink
●
has a code registered to it, the already registered code will not be erased.
Before programming
■
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the HomeLink
●
IS350 AWD/IS350/IS300 AWD/IS300_U
6-5. Using the other interior features
®
memory (all three codes)
®
indi-
®
®
memory
447
®
button that already
.
6