Fitting The Control Unit Module - Viessmann VITOCROSSAL 200 Installation Instructions Manual
Type cm2c
Hide thumbs
Also See for VITOCROSSAL 200:
- Service instructions manual (96 pages) ,
- Service instructions for contractors (88 pages) ,
- Instructions manual (72 pages)
Table of Contents
Advertisement
Mounting the burner
Fitting the control unit module
2.
Fig. 5
2. Use 5 screws
.
9
3. Use 4 screws
.
qE
(cont.)
3.
3x
2x
4.
4x
1.
4. Connect the earth cable supplied to the blade ter-
minal contact on the bracket.
The 2 ends of the earth cable are later connected
to the control unit PCB and to the panel that covers
the control unit.
11
Advertisement
Table of Contents
