Huawei eSpace IPC 2601-P User Manual page 65

eSpace IPC 2601(5601)-P
User Guide
Figure 6-26 Surveillance deployment plan tab page
Step 2 Select a value from Incident type.
Step 3 Specify the time segment.
1. Click Add plan.
The page for adding a plan is displayed, as shown in Figure 6-27.
Figure 6-27 Adding a plan
2. Set the start time, end time, and cyclic mode, and select a weekday.
3. Click OK.

To modify the current surveillance deployment plan, click Modify and modify the
settings on the displayed page.

To delete the current surveillance deployment plan, click Delete.
Step 4 Click Save.
----End
Issue 01 (2012-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parameter Settings
61