Huawei eSpace IPC 2601-P User Manual page 9

eSpace IPC 2601(5601)-P
User Guide
Table 2-2 Components on the rear panel
No. Component
1 DC/AC power
interface
2 Video output port
3 System Reset button
4 Line-in interface
5 Line-out interface
6 System status
indicator
7 Alarm interface,
RS-485 interface
8 PoE interface
9 Network connectivity
indicator
10 Network activity
indicator
11 SD card slot
12 Ground interface
Issue 01 (2012-10-15)
Function
Connects to the power supply of 12V DC or 24V
AC.
Outputs analog video signals and connects to a
TV monitor to display analog videos.

Press RST with needle at least 3 seconds, then
the system can renew the default configuration,
such as IP address, focus, and password.

Connects to an audio input device.
Connects to an audio output device.
Indicates the system running status. For details,
see 0.
Alarm interface:

1-channel alarm output

1-channel alarm input
RS-485 interface: Connects to a Pan Tilt Zoom
(PTZ) mount.
The connected device cannot enable the fire
emergency, security guard, anti-theft, or smoke
detection function.
Connects to a network device and powers the IPC
over Ethernet. Supports Power over Ethernet
(PoE).
Displays green when the network is connected.
Blinks yellow when data is being transmitted.
Connects to SD cards.
Connects to a ground screw to prevent static
electricity or lightning.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Restarts the device when you hold down the
button for less than three seconds.
2 Structure and Components
5