Huawei eSpace IPC 2601-P User Manual page 59

eSpace IPC 2601(5601)-P
User Guide
The serial port settings must be consistent with the connected device. Otherwise, the device
may fail to function properly.
Step 1 Choose Settings > PTZ Configuration > Serial Port Parameters.
The page for configuring the serial port parameters is displayed, as shown in Figure
6-21.
Figure 6-21 Serial port Parameters tab page
Step 2 Set parameters according to Table 6-16.
Table 6-16 Parameter description
Parameter
No.
Type
Baud rate
Data bit
Issue 01 (2012-10-15)
Description
ID of the serial port.
Type of the IP camera
serial port.
Communication rate,
which must be the same
as that of the connected
device.
Actual number of data
bits used for the
communication.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Parameter Settings
Setting
[How to set]
Select a value from the
drop-down list box.
[How to set]
Retain the default value.
[How to set]
Select a value from the
drop-down list box.
[How to set]
Select a value from the
drop-down list box.
55