JLG Metro-Led Operation And Safety Manual page 21

!
DO NOT USE THE JOCKEY WHEEL TO
SUPPORT THE MACHINE WHEN THE MAST
IS RAISED. PRIOR TO RAISING THE MAST,
CHECK AND ENSURE
OVERHEAD OBSTRUCTIONS EXIST.
10. Raise the mast to desired elevation by
operating the enable and lift control
toggle switches simultaneously.
11. Adjust the lighthead tilt angle by
operating the enable and tilt control
toggle switches simultaneously.
12. Adjust the angle lighthead rotation to
desired angle by operating the enable
and rotate control toggle switch while
simultaneously.
!
TO AVOID CRUSHING INJURIES, REMAIN
CLEAR OF MOVING MAST SECTIONS AND
LIGHTHEAD.
Section 1
METRO-LED
MACHINE OPERATION
TURNING-ON THE ENGINE/LIGHTS
CONTROLLER MODULE
THAT NO
BEFORE OPERATING THE CONTROLLER,
RELEASE THE EMERGENCY-STOP.
WHEN THE BATTERY IS CONNECTED, THE
CONTROLLER BOOTS IN AUTO-MODE.
PRESS THE CONTROLLER
TO INITIATE CONTROLLER "STAND-BY"
MODE.
Page 1-17
BUTTON
1001206597