JLG Metro-Led Operation And Safety Manual page 17

6. Set the time using the UP /DOWN
arrows. Press
advance to the next place in the 24
hour clock (HR/MIN/SEC).
7. After pressing MENU/CONFIRM the
home screen will be displayed. The
current time can be viewed by pushing
the DOWN arrow once.
METRO-LED CONTROLLER
"POWER-SAVE" MODE
If the controller remains inactive for more
than ten (10) minutes, the controller will
switch to the "power-save"
(controller screen turns-off).
To return the controller from "power-save"
mode,
press for six to ten (6-10) seconds.
Note: Three (3)
programmed machine
controller returns from the "power-save"
mode to initiate the auto-start sequence.
Section 1
METRO-LED
MACHINE CONTROLS
MENU/CONFIRM to
mode
minutes before a
auto-start, the
Page 1-13 1001206597