JLG Metro-Led Operation And Safety Manual page 14

OPTIONAL CONTROL PANEL
METRO-LED MODULE
1
2
1. Lighting tower control module, controls
1
engine/genset and tower lights.
2. Mast function enable switch. Toggle
2
"up" and hold before toggling other
mast control switches
3. Mast raise/lower toggle switch.
3
Toggle switch "up" to raise mast.
Toggle switch "down" lower mast.
Note: Switch centre position is "off".
4. Lighthead tilt toggle switch. Tilts light-
4
head up to 40° from the horizontal.
Note: Switch centre position is off.
5. Lighthead rotate toggle switch. Rotates 5
lighthead ±58° of the trailer centre-line.
Note: Switch centre position is "off"
RELEASE EMERGENCY-STOP BUTTON,
BEFORE OPERATING THE CONTROLLER.
Section 1
METRO-LED
MACHINE CONTROLS
OPTIONAL METRO-LED MODULE
AUTO-START INSTRUCTIONS
4
1. Complete all lighting tower operating
safety checks.
2. Switch battery and engine starter
isolators to "on" and the emergency
stop button is released.
5
3. Press the Auto button on the LED
controller to show the AUTO MODE
SELECT screen.
3
4. Use the UP and DOWN ARROWS to
scroll to 01 AUTO TIMER MODE.
5. Press the MENU/CONFIRM button.
6. Scroll to 03 TIMER SET using the UP
or DOWN arrows.
7. Press MENU/CONFIRM to open the
Timer Running Action screen.
Page 1-10 1001206597