JLG Metro-Led Operation And Safety Manual page 15

8. Scroll with the DOWN ARROW to 02
AUTO RUN TIMER screen.
9. Press the MENU/CONFIRM button.
10. Set the starting time using the
UP/DOWN arrow buttons to change
the numbers in each digit place.
To enter the next digit place, press
MENU/CONFIRM.
11. Set the required "Duration" period
of operation , then press
MENU/CONFIRM until the cursor
disappears.
Section 1
METRO-LED
MACHINE CONTROLS
12.
13.
14.
15.
16.
17.
Page 1-11
Press the STOP button to return to
the home screen.
Press the DOWN
display a summary of the current
machine settings.
10 seconds before the engine start-
up an audible alarm sounds.
At the progammed starting time the
engine will commence the pre-heat
cycle. After 5 seconds the starter
motor cranks the engine.
the controller setting allows the
engine to "warm-up" for 10 seconds.
After completing engine 'warm-up',
each tower light is switched-on
sequenced at 3 second intervals.
ARROW to
1001206597