Shallow Water Operation - TOHATSU MFS 4C Owner's Manual

42
ENGINE OPERATION
1
3
1. Tilt up position
2. Tilt stopper
3. Shallow water running position
ENOM00424-0
Tilt down
Slightly tilt the motor up, and pull the tilt
7
lever toward you to release the tilt-lock.
Then lower the motor slowly.
1. Tilt lever
2. Tilt stopper
ENOM00068-A

9. Shallow water operation

ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
2
ENOF00442-0
1
2
ENOF00443-0
WARNING
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
CAUTION
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-A
CAUTION
Do not overtilt outboard motor when driving
shallow water, or air may be sucked through
water inlet, potentially leading to engine
overheating.
1
1. Water inlet
Manual tilt type
Shallow water running position:
1. With the shift lever in Forward, tilt the
motor up slowly by about 40° and
then lower the tilt lever for setting at
the shallow water running position.
Return to normal running position:
2. Tilt the motor up
return the motor down slowly to the
normal running position.
ENOF01144-A
fully and then