Siemens DMS8000 Installation Operation, Manual, Configuration page 14

4 Configuration
Configuration procedure for DVRs
14
Building Technologies
CPS Fire Safety
2. In the Setting section, enter the IP address, which should match the value locally
set in the DVR unit.
3. Check the Enable Secure Connection checkbox and enter Username and
Password of the account defined as Recorder Password in the NICE/RIVER
SiteBuilder tool.
NOTE: it is strongly recommended to enable the secure connection. In the
SiteBuilder tool, the secure connection can be enabled as follows:
- Select the Recorder and then click the Recorder Password icon.
- In the Set&Remove Recorder Credentials dialog that displays, click Set
Credentials.
- Enter Username and Password that you will be using for the corresponding DVR
in Composer (you can use a different username and/or password for each
recorder) .
- Click OK.
Linking the DVR node
1. Expand the node structure including the NR Video Driver:
Supervisor System Settings > MM8000 System > Physical configuration > <Station
name> > Video Network Manager
2. Select the DVR node.
3. Drag and drop the link to the Video Driver.
A6V10097205_a_en
30.09.2016