Emc Compliance - Dalsa Rad-icon 1520 User Manual

Rad-icon 1520 GigE User Manual
operation of the camera system in the End-user's installation. It is the Users and End-
users responsibility to ensure that local and federal guidelines regarding the installation
and operation of X-ray sources are followed.
The power requirements of the product, especially the voltage specifications, must be
strictly adhered to or warranty will be void.
No User Serviceable Components
There are no components in this system which need to be replaced, modified, or adjusted
by the end user. Please contact Teledyne DALSA Support for assistance if needed.
Safety Warning: Tampering with this product voids the warranty and may degrade the
detectors image quality, resulting in a possibly unsafe condition for (End-)Users.
The system has been designed to minimize the amount of interference it may generate in
an installation. This equipment generates and can radiate radio frequency energy and, if
not installed and operated in accordance with the instructions, may cause harmful
interference to other devices in the area.
Stacking
Teledyne DALSA does not recommend that the user stack the product or use it in
adjacent to other equipment. If this arrangement is unavoidable, then the (End-)user
must ensure that there is adequate airflow around the detector and that normal operation
conditions are maintained.
Disposal of Product
The detector contains lead and no batteries. Dispose the unit in accordance with local
regulatory guidelines.

EMC compliance

To ensure EMC compliance, follow these specific guidelines:
Warning

Ensure that all cable shields have a 360 electrical connection to the connector.

Tightly fasten and secure all connectors.

The detector can influence the performance of very sensitive equipment.

Strong EMC disturbances can influence the detectors performance.
5
Teledyne DALSA