The display shows Gateway
Monitor. In Gateway Monitor
Mode CM5000 checks if the
communication goes through
other gateway or not.
• When it does not pick up other
gateway communication, it
switches to Gateway Mode.
• When it detects other gateway
communication during
Gateway Monitor mode. The
display shows Gateway
Detected message. The radio
is in Temporary DMO.
It checks other gateway communication all the time. If
other gateway communication disappears, CM5000
returns to Gateway Monitor Mode.
Press Exit in Temporary DMO to switch to DMO.
Entering Repeater Mode
When your CM5000 is in TMO
enter Repeater Mode in one of
the following ways:
• From the Home display press
Optns
and select
Mode as required.
• Press the Menu button and
select More... > Networks > Repeater Mode.
Making Calls
See the relevant sections in the user guide.
Repeater
15