What To Do If - Motorola Cleartone CM5000 User Manual

What to do if...

Your CM5000 flashes the following messages:
Messages
...-Rcvd
Attachment
Failed
Authenticate
Failure
Call Cancelled
Call Ended
Call Preempted Channel being used for priority.
Emgcy In Use:
Wait For Mic
Emgcy Mic
Ended
Emgcy Mic On
Empty Entry
Faulty Unit
Error...
Message Description
Call received but not answered, or rejected
The CM5000 could not perform talkgroup attachment.
The CM5000 keeps on trying. If it does not succeed, try
another talkgroup.
The CM5000 could not register on an Authenticated
system (for example, the Authentication key is incorrect,
or Authentication is disabled in the CM5000).
Called CM5000 cancelled the call.
• Faulty channel. Please try later.
• Called CM5000 ended the call.
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency
Call on the same talkgroup. The CM5000 microphone is
not active during this time, but the CM5000 will
automatically try to regain talk permit after a
predetermined time.
The Hot Microphone timer has automatically expired, or
the user has pressed the PTT button to cancel the Hot
Microphone feature.
The Hot Microphone feature is active, and the CM5000
is automatically transmitting hands free emergency
audio.
The speed number you dialled does not exist, or the
number exists but the group is non-selectable.
Self-test failed. An operational fault has been detected
with your CM5000. Record the error number. Turn your
CM5000 off and contact service.
77