Gps Icon; Gps Enable/Disable; Entering Gps Location Service - Motorola Cleartone CM5000 User Manual

GPS Icon

When your terminal is receiving valid GPS location data, a
GPS icon will be shown in the display:
Please note, that during emergency mode, your terminal will
not display the GPS icon even when receiving GPS location
data. If valid GPS location data is available when you leave
emergency mode the GPS icon will be displayed again.

GPS Enable/Disable

1. From the main menu,
More... > Location > Interface.
The current selection (On/Off) is highlighted.
2. Select the new choice. The display shows:
On — Location Service On
Off — Location Service Off

Entering GPS Location Service

To enter the GPS sub-menu,
press the Menu button and
select More... > Location:
Position — provides the actual
position information.
Interface — allows you to
enable/disable the GPS location
service.
Test Page — provides detailed position information.
Scroll to your selection and press Select to access the next
display.
the Menu button and select
press
35