Sending A Predefined Template; Sending A Status Message - Motorola Cleartone CM5000 User Manual

You are allowed to perform limited edit operations of the
predefined template and to send it, but you will not be able to
store the edited template or erase it from the predefined
template list.
From the main menu, select Messages > Predefined
The first template in the predefined template list is displayed
(if no predefined template exist, the message No Predefined
will be displayed).

Sending a Predefined Template

1. Press Send or PTT to send the message.
2. The display will show one of the following delivery reports:
• Message Delivered — to indicate that the message
was successfully sent and received.
• Message Failed — the message was not received.
3. After sending the message, your CM5000 will return to the
predefined template list or to the message editor screen.
It is recommended to wait for the message acknowledge
before sending a new message.

Sending a Status Message

1. Switch to the desired talkgroup, to which you want to send
a status message.
2. From the main menu, select
Messages > Send Status
3. In this example, Status 3 is the
last sent status. If you wish to
send a different status, scroll to
your selection in the list of pre-
programmed statuses, or key
the status number. To stop scrolling, press Back. The
display returns to the select status list.
.
.
69