Jointly Synchronizing Siprotec 4 Or Siprotec 5 Devices And Siprotec 3 Devices - Siemens 7XV5654-0BA00 Manual

3.7 Jointly Synchronizing SIPROTEC 4 or SIPROTEC 5 Devices and
SIPROTEC 3 Devices
In this use case, the Sync-Transceiver operates in 2-channel mode. The Sync-Transceiver transmits the time-
protocol information IRIG B or DCF77 to up to 6 SIPROTEC 4 or SIPROTEC 5 protection devices via channel 1.
The Sync-Transceiver transmits the minute pulse to the SIPROTEC 3 protection devices via channel 2.
Table 3-6
Switch
S1/1
S1/2
S1/3
S1/4
[dw_synchron_SIP4_5_and_SIP3-devices, 1, en_US]
Figure 3-6
Accessories, Sync Transceiver, Optical/Electrical Converter for Time Synchronization, Manual
C53000-G9050-C168-1, Edition 09.2019

3.7 Jointly Synchronizing SIPROTEC 4 or SIPROTEC 5 Devices and SIPROTEC 3 Devices

DIP Switch Positions in the Sync-Transceiver
Position
Application-specific (light idle state mode as per the system configuration at the optical-
fiber input R1)
Application-specific (light idle state mode as per the system configuration at the optical-
fiber input R2)
Open (2-channel mode)
Closed (K2 is activated)
Jointly Synchronizing a Maximum of 6 SIPROTEC 4 or SIPROTEC 5 Devices and SIPROTEC 3
Devices
Application Examples
33