Advertisement
Quick Links
SERVICE PARTS
7688K-4E3
WALL MOUNT BATH & SHOWER FAUCET
1219595**
Connection Kit
1181006**
Handspray
1169649
Restrictor
880010
Washer
831727**
Hose
**Color code must be specified when ordering
1141292-2A-B
3010479**
Lever
833438
Screw
3006660
834705
Nut
Plug
834460
Valve
880085
O-Ring
880084
O-Ring
3008415**
Diverter Plug
834562**
Aerator
3008440**
Diverter Assy
831752
Check Valve
1216770**
Shower Bracket
INSTALLATION INSTRUCTIONS
7688K-4E3
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. The minimum inlet water pressure for the diverter is 0.05MPa(0.5bar).
3. The highest working pressure for handspray is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure
reducer is needed. The highest water and environment temperature is 60°C. Please keep handspray,
showerhead and the shower arm away from heater, or it may become damaged and cause injury to the user.
HANDLE OPERATION
Lift the handle gently. Turn clockwise for hot water, turn counter-clockwise for cold water.
Diverter turns clockwise for shower. Shut off the faucet, turns counter-clockwise until it stops for bath spout.
ROUGH-IN DIMENSIONS
4
1141292-2A-B
WALL MOUNT BATH & SHOWER FAUCET
G1/2˝
24°
G1/2˝
115
159
G1/2˝
170
60
88
G1/2˝
49
1
Advertisement
Related Manuals for Kohler Candide 7688K-4E3
Summary of Contents for Kohler Candide 7688K-4E3
-
Page 1: Installation Instructions
BEFORE YOU BEGIN 3010479** Lever All information is based on the latest product information available at the time of publication. Kohler Co. 833438 reserves the right to make changes in product characteristics, packaging, or availability at any time without Screw notice. - Page 2 Thread the escutcheons(3) onto the connectors until they are against Do not use abrasive cleaners or solvents on Kohler faucets and fittings. the finished wall. Insert washer seals(4) into supply nuts(5) of the faucet. Thread the faucet supply nuts onto the connectors and tighten.