Glass Breakage Delector; Disarmnalet Switch - Honda 08E51-S84-100 Operating Instructions Manual

System Controls
The Glass Breakage Detector is a microphone th at detects the sound of breaking glass.
Glass Breakage Detector
When the microphone detects a sound similar to breaking glass, the alarm will be
triggered immediately.
SENSITIVITY
.
(8 " " . - --
Preset at the
•
~
'\ • ce nter dot
MIN
!.tMAX
pOSition at the
factory.
The Glass Breakage Detector sensi tivity is
preset at the center dot position at the
factory: however, if an adjustment is
necessary, please consult your local Honda
dealer.
The sensitivity control is located on the top
of the main unit.
If the sensitivity is set too low, th e micro­
phon e may not detect the sound of breaking
glass.
If the sensitivity is set 1 00 high, the micro ­
phone may cause fa lse alarms.
Th e DisarmtValet switch is used to control three function s:
• Disarming the Security System .
• Placi ng the Security System into Valet mode. (Wh en the Armin g Mode switch is set to the
DisarmNalet Switch
Auto or Auto Lock mode on ly.)
• Acces sing Tripped Sensor Recall.
• The location of the Valet switch varies depending on the vehicles. Contact your local Honda
dealer fo r the exact location.
~--------------------,
..
@
DisarmNalel Swllch
The DlsarmNalet Switch is located on the
lower dashboard cover to the left of th e
steering wheel.
For specific operating procedures please
refer to th e Disarm , Val et, or Tripped
Sensor sections of this manual.
13