Ignition - Dell Edge Gateway 3002 Specifications

DC parameters
System full load
Recommended power supply
Table 8. PoE parameters
PoE parameters
Compatibility
Number of ports
Speed
Connector
Protection
Power input
Supported input voltage
Supported input current

Ignition

Table 9. Ignition parameters
Parameter
High-level input voltage (V
Low-level input voltage(V
Minimum voltage
) 9 V
IH
) 0 V
IL
12.9 W
NOTE: Operating system active with 100% processor
utilization and simultaneous access to I/O devices.
17 W (20% derating)
NOTE: With consideration of voltage derating under
high environmental temperature.
IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x,
IEEE802.3af
NOTE: Full-controller compliance with IEEE
802.3.af standard for maximum 15.4 W, with power
up to 48 V over existing Ethernet infrastructure,
with no modifications required.
NOTE: Standard IEEE 802.3 Ethernet interface
provided for 100BASE-TX and 10BASE-T
applications (802.3, 802.3u, 802.3ab, and 802.3x)
9014-bytes jumbo frame support.
One Fast Ethernet Media Access Control (MAC) port and
one physical layer (PHY) port
10/100 Mbps (supports Wake on LAN and WLAN)
8-pin RJ45
Built-in 2.25 KV isolation protection on LAN ports and ESD
IEC61000-4-2 ±30 KV
15.4 W maximum according to IEEE 802.3af-2003
(standard)
48 V DC
0.27 A
Maximum voltage
32 V
1.2 V
Default
12 V
0 V
9