Specifications - ATN NVB8 User Manual

spEcIfIcATIons

Magnification ................................ 8x
Intensifier tube ............................. Gen. 2, CGT, HPT or Gen.3
Field of view ................................. 6.5°
Range of Focus ............................ 3 m to u
Power Supply ............................... 3 V, Lithium or 1.5V, AA type
Battery Life (CR123A type) .......... 60 hours (20 hours w/IR illuminator)- Gen.2+;
Operating Temperature ................ -40°C to +50°C
Storage Temperature ................... -50°C to +70°C
Dimensions .................................. 12.4'' x 4.3'' x 4"/ 315mm x 108mm x 102mm
Weight .......................................... 2.6 lb/1.16 kg
* ATN reserves the right to change the above specifications at any time without notice
fEATuREs
• High Quality
• Super fast lens system provides the user with clear and sharp image
• Dual eye viewing system for long viewing sessions
• Built-in Infrared illuminator lets you see even in the total darkness
• Rugged and versatile design
• Easy-to-use digital controls
• Tripod mountable
• Weather and fog resistant
• Two-Year Warranty
ApplIcATIon
The NVB8 are powerful night vision bi-oculars. They are weather and fog resistant and
can withstand the rigours of almost any environment. The NVB8 will give you the range
and clarity that other bi-oculars simply can not touch.
The NVB8 have a built-in IR for total darkness with indicator "ON" light within the FOV.
The NVB8 are available with a wide range of image intensifier options to meet a wide ar-
ray of specification requirements.
The NVB8 complex opticoelectronic system for individual use. The device consists of an
objective lens assembly, an eyepiece and a body. The body contains an image intensifier
tube assembly with an integrated high voltage power source and a battery housing.
The objective lens protective cover is intended to protect the objective lens from dust and
scratches. It will also function as a daylight filter, allowing you to test the scope in daylight
or other bright light situations. The pinhole in the center of the protective cover allows the
user to check the operation ability of the device in daylight conditions.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on
for more than ten (10) minutes.
Gen. 2, CGT, HPT or Gen.3
50 hours (17 hours w/IR illuminator)- Gen.3
image intensifier tube
2