Safety; General Safety; Safety And Instructional Decals - Toro Greensmaster 1000 Operator's Manual

Safety

This machine has been designed in accordance
with EN ISO 5395 and ANSI B71.4-2017 and meets
these standards when you add the Operator
Presence Kit and required decals.

General Safety

This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator's Manual before starting the machine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Entanglement hazard—stay away from moving parts.
1. Reel drive
2. Engage
93-9356
93-7346
3. Disengage
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the engine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
decal93-9356
1. Fast
2. Continuous variable
setting
decal93-7346
4
, which
93-6085
3. Slow
decal93-6085