Supplied Components; System Requirements - Sharp PN-CD701 Operation Manual

If any components are missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Power cord: 1
 HDMI cable: 1
 USB Type C cable (26.2 feet [8 m]): 1
 USB Type C extend cable: 1
 CD-ROM: 1
 Setup Manual: 1
 Touch pen: 1
* The remote control unit is supplied with the PN-ZR02 (optional).
(Remote control sensor box is not used.)
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
About USB Type C extend cable
• Connect the USB Type C extend cable (supplied) between the USB Type C cable (supplied) and the external device.
When connecting/disconnecting to the external device, plug/unplug the USB Type C extend cable to prevent damage to the
USB Type C cable.
Hardware
Operating system
The USB port varies depending on the terminal connected to the computer.
USB Type C 1 input terminal
USB Type C 2 input terminal
HDMI input terminal

Supplied Components

 USB A to B cable (for touch back): 1
 Cable clamp: 1
 Camera: 1
 Knurled screw (M3): 2
 USB A to B cable (for camera): 1
 S/PDIF cable: 1
 3.5 mm mini jack to USB A cable: 1

System Requirements

Must have a USB 2.0 compliant port.
Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version)
(Windows 10 recommended.)
macOS v10.12, v10.13
Google Chrome OS Version 75 or later
 IoT sensor hub: 1
 Micro USB cable (for IoT sensor hub): 1
 Knurled screw (M3): 2
 IoT sensor hub screw (M3): 2
 IoT sensor hub mounting brackets (L/R):
x1 each
USB Type C 1 input terminal
USB Type C 2 input terminal
USB Type B input terminal for touch back
9
E