Technical Specifications - RC Factory Clik Evo Building Instructions

get a perfect knife edge without any tendency to roll.
For clean rolls, without any coupling to yaw (we prefer to test this on
°
45 upline, like in the
climbing parts of the reverse Cuban eight), you may want to play with
aileron differential
(different up and down deflection of ailerons). Our prototypes needed
some differential (more
up than down). To change the differential, you can use the included
extension servo arm. If your aileron pushrods are on the bottom of the
wing,
you get more differential when you use holes more to the front of the
servo arm.
°
For F3P flying, we use about 35 throws on all controls, with 40% of
exponential. Before
transition from level flight to the torque roll (part of the F3P
sequence), we switch to
– °
somewhat higher rate on elevator (40 45 ).
The rest is up to you, remember that training makes perfect!
Enjoy your new F3P plane!
Your RC Factory team.

Technical specifications:

wingspan: 800 mm
lenght: 930 mm
–
AUW: 115
140 g
motor: 20 - 60W Brushless Motor
battery: 2 - 3S LiPo battery pack 120 - 360mAh
ESC: 4 - 12A Speed Brushless Controller
–
Servos: 3 - 4 Servos 4.5
6g
© 2011