Advertisement
USE GENUINE GRACO PARTS AND ACCESSORIES
Must be purchased separately .
EXTRUSION FLO GUN 207–945
420 bar (6000 psi) MAXIMUM WORKING PRESSURE
Pistol–type trigger. 1/2 npt(f) inlet.
HYDRA–MASTIC
POLE GUN 207–127
210 bar (3000 psi) MAXIMUM WORKING PRESSURE
Has 30 in. extension, 30 tip angle. Order tip separately.
HYDRA–MASTIC
GUN 206–718
210 bar (3000 psi) MAXIMUM WORKING PRESSURE
For extra viscous materials. 1/2 npsm(m) inlet.
MODEL 207–127
MODEL 207–945
FLOOR STAND KIT 222–689
Provides secure floor mounting for pump when used with
bulk fluid containers. 3" npt fluid inlet. Includes instruc-
tions.
ACCESSORIES
200 LITER (55 gallon) RAM 207–279
For extruding highly viscous fluids from open 200 liter (55
gallon) drums.
TWO–POST 19 LITER (5 gallon) RAM 520–075
For extruding highly viscous fluids from open 19 liter (5
gallon) drums.
SINGLE POST 19 LITER (5 gallon) RAM 206–450
For extruding highly viscous fluids from 19 liter (5 gallon)
pails. If an inductor plate is needed, order inductor plate
part number 206–747.
MODEL 206–718
PUMP
INTAKE
INDUCTOR PLATE 206–747
ACCESSORIES CONTINUED ON THE NEXT P AGE
Model 207–279
Model 206–450
Advertisement
