Advertisement
USE GENUINE GRACO PARTS AND ACCESSORIES
Must be purchased separately .
GROUNDING CLAMP 103–538
GROUND WIRE
208–950
7.6 m (25 ft) long,
1.5 mm (12 gauge)
AIR PRESSURE REGULATOR KIT
14 bar (200 psi) MAXIMUM WORKING PRESSURE
Includes bleed–type master air valve
205–712
For Bulldog pumps
207–651
For King pumps
3/4 npt BLEED–TYPE
MASTER AIR VALVE
3/4 npsm(f) SWIVEL
AIR INLET UNION
AIR LINE FILTER 106–150
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
3/4 npt inlet and outlet
AIR LINE LUBRICATOR 214–849
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
3/4 npt inlet and outlet
FILTER 106–150
ACCESSORIES
LUBRICATOR 214–849
BLEED–TYPE MASTER AIR VALVE 107–141
21 bar (300 psi) MAXIMUM WORKING PRESSURE
3/4 npt(mxf) inlet and outlet
Relieves air trapped in the air line between the pump air
inlet and this valve when closed.
PUMP RUNAWAY VALVE 215–362
12 bar (180 psi) MAXIMUM WORKING PRESSURE
Shuts off air supply to the pump if the pump accelerates
beyond the pre–adjusted setting due to an empty supply
container, interrupted fluid supply to the pump, or exces-
sive cavitation. 3/4 npt(f).
FLUID DRAIN VALVE 210–658
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
3/8 npt (mbe); Viton seals
GRACO THROAT SEAL LIQUID
Non–evaporating liquid for wet cup
206–995
0.95 liter (1 quart)
206–996
3.8 liter (1 gallon)
AIR MOTOR SILENCER
208–804
Encloses motor to reduce the noise of the
King pump. Install on a barrel ram.
214–766
Encloses motor to reduce the noise of the
Bulldog pump.
ACCESSORIES CONTINUED ON THE NEXT P AGE
Advertisement
