Huawei UPS5000-E FM Series Quick Manual page 15

5. (Optional) Secure the cable entry cabinet to the
floor.
6. Remove a certain number of the front row of small
covers from the bottom of the cable entry cabinet
based on the actual cable conditions.
7. (Skip this step if the mains input and bypass input
share a power source.) Remove the copper bars
between the mains input and bypass input.
8. Connect the ground cable, power cable, and signal
cable. There is no need to connect the bypass
input power cable if the mains input and bypass
input share a power source.
9. Install the right cover of the UPS cabinet on the
right of the cable entry cabinet, and install other
covers in the original positions.
(1) Signal cable
(2) Ground cables and power cables
15