Huawei UPS5000-E FM Series Quick Manual page 12

Prepare the mobile phone app (Service Expert).
Insert the WiFi module into the USB port on
the MDU.
Enable the mobile phone WLAN, search for
the UPS WiFi signal, and connect to the WiFi
signal. The default value of WiFi SSID is
UPS_WiFi. The initial WiFi password is
Changeme by default.
Open the Service Expert app on the mobile
phone.
On the app home screen, tap StartUp to
access the Set Startup screen. Set the Site
and Device Type as required, and connect
the device. Enter the UPS IP and Port (443
by default) as well as the user name and
password of the WebUI account, and tap
Login.
After login, tap Power-on password
activation on the screen. In the displayed
dialog box, tap OK to start the UPS.
Non-initial Startup
a) On the main menu, choose Common Functions and tap Inv. ON.
b) In the displayed dialog box, tap Yes to start the inverter.
System User
admin (system administrator)
operator (common user)
Use the app to
start the inverter
online?
Yes
On the MDU, choose System Info >
Maintenance > Inv. ON and obtain the Bar
code and Verification code.
Open the Service Expert app on the
mobile phone.
On the home screen of the app, tap
StartUp to access the Set Startup screen.
Set Site and Device Type as required, and
tap Offline Activation.
Enter Bar code and Verification code
obtained from the MDU on the Offline
Activation screen. Tap Generate PWD to
generate a startup password. Note: If the
entered startup password is incorrect, you
need to tap Inv. ON again on the MDU to
obtain a new verification code, and then
generate a password on the app.
Enter the generated password in the
password textbox on the MDU to start the
inverter.
LCD Preset Password
000001
000001
12
No, start
the inverter
offline
WebUI Preset Password
Changeme
Changeme