Rotabroach ELEMENT 9 Series Original Instructions Manual page 9

Element 9 Manual
ADDITIONAL SAFETY RULES OF METAL CUTTING SAWS
CAREFULLY READ THE FOLLOWING SAFETY WARNINGS PRIOR TO CONNECTING THE METAL CUTTING SAW TO POWER.
You must keep the safety device in the fixed position, and work according to the manual. Never wedging or binding the saw.
1.
Before using the metal cutting saw, you must check all safety warnings.
The blade should be kept clean and sharp.
2.
Way to clean the cutting chips
Unscrew the Knob Bolts (A) on the blade housing. As shown in Fig.22
Remove chip shield (B). (keeping the Knob bolt screwed on guard. As shown
1.
in Fig.23
Release the chips.
2.
Beware: Always keep the saw away from your body when removing the chip
shield, the chips will fall out. The chips is very hot, Be careful not to touch it by
hand when you remove the chip shield.
Original instructions
9
Nov 2019