Advertisement
Step 31. Remove Option 222 License
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A keyboard and mouse must be connected to the network analyzer.
Option 222 License Removal Procedure
1. To start the Keysight License Manager, press Start > Keysight License Manager > Keysight
License Manager. A Keysight License Manager dialog box will appear.
2. Right click the on the desired option and click Delete.
3. In the Select Desired Option list, click 222.
4. In the Keysight License Manager dialog box that appears, press or click Yes to confirm delete.
5. A message displays stating that the option removal was successful.
6. Restart the PNA Analyzer application: Press File > Exit.
7. In the Exit NA Application dialog box that opens, press OK.
Step 32.Enable Option 422
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A keyboard and mouse must be connected to the network analyzer.
— Refer to the license message you received from Keysight: Verify that the analyzer's model and
serial numbers match those on the license message you received from Keysight.
— Obtain your license key file(s) for installation of this upgrade by following the instructions on the
supplied Software Entitlement Certificate.
Installation Note N5242-90123
For this step, you will need a USB flash drive.
Installation Procedure for the Upgrade
38
Advertisement
