Table of Contents
Advertisement
2.
Safety instructions
The record system 20 sliding door has been constructed with state of the art technology and ac-
cording to recognised technical safety regulations. It complies with the requirements of Machine
Guideline 2006/42/EG.
Nevertheless, danger can arise for the end-user if the installation is not used as intended.
2.1.
Use for the intended purpose
The record system 20 operator is designed exclusively for normal service with automatic sliding
doors in dry rooms and must be installed indoors or on the inner side of a building. It can also be
mounted on the outer side, if the customer provides for a proper sealing.
Any other application or use beyond this purpose is not considered to be an intended purpose.
The manufacturer bears no liability for any resulting damage; the operator alone shall bear the
responsibility.
The intended purpose also includes observation of the operating conditions specified by the manu-
facturer, in addition to regular care, maintenance and repair.
Unauthorized modifications to the automatic door will release the manufacturer from all liability for
any resulting damage.
2.2.
General safety and accident prevention regulations
record sliding door system 20
ATTENTION
•
Any work of installation, maintenance or repair on record system 20 may only
be performed by the manufacturer or by the qualified and authorized staff of
his representatives.
A risk assessment is to be carried out for the whole installation.
•
WARNING
No safety devices (sensors) may be dismantled or placed out of use.
CAUTION
No persons or objects may be present in the opening area of the sliding door, in
order to avoid squashing and cutting.
ATTENTION
The automatic pedestrian sliding door operator is NOT intended to be discon-
nected from the mains at night!
Safety instructions
Article no. 102-020.110.805
2
page 4
Hide quick links:
Advertisement
Table of Contents
