Residual Risks; Environmental Protection; Maintenance - Ryobi RBG6G Original Instructions Manual

Information available on the grinding wheel label
The information on the wheel label is important. Read and
check it carefully to ensure you are selecting the correct
type of wheel.
1. Manufacturer, supplier, importer or trade mark.
2. Nominal dimensions of grinding wheel, in particular the
diameter of the bore.
3. Abrasive type, grain size, grade or hardness, type of
bond and use of reinforcement.
4. Maximum operation speed in metres per second.
5. Maximum permissible speed of rotation in 1/min .
6. For declaration of conformity, the abrasive products
shall be marked with EN 12413.
7. Restriction of use and safety warning symbols.
8. Traceability code, eg. A production/batch number,
expiry date or series number.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
Risk of contact with unguarded parts of the rotating
wheel.
Burn hazard from contact with hot wheel or work piece.
Damage to respiratory system if effective dust mask is
not worn.
Damage to hearing if effective hearing protection is not
worn.
KNOW YOUR PRODUCT
See page 107.
1. Spark shield with magnifying lens
2. Spark shield
3. Spark arrestor
4. Wheel guard
5. Grinding wheel
6. Work rest
7. On/off switch
8. Mounting hole
9. Work rest lock knob

MAINTENANCE

Do not modify the product in any way or use accessories
not approved by the manufacturer. Your safety and that
of others may be compromised.
Do not use the product if any switches, guards or
other functions does not work as intended. Return to
an authorised service centre for professional repair or
adjustment.
Do not make any adjustments whilst the product is
running.
Always make sure the power plug has been
removed from the mains power source before
making adjustments, lubricating or when doing any
maintenance on the product.
Before and after each use, check the product for
damage or broken parts. Keep the product in top
working condition by immediately replacing parts with
spares approved by the manufacturer.
Clean out accumulated dust using a brush or vacuum
cleaner. Do not use compressed air.
To assure safety and reliability, all repairs, including
changing brushes, should be performed by an
authorised service centre.
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorised
service centre to prevent damage to the bench grinder
or risk of electrocution.
WARNING
For greater safety and reliability, all repairs should be
performed by an Authorised Ryobi Service Centre.
TRANSPORTATION AND STORAGE
When storing the product, disconnect the power
cord. Store the product in a secure place that is not
accessible to children.
Clean the product using a brush and vacuum cleaner
before storage.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
Please read the instructions carefully before
starting the product.
CE conformity
Wear ear protection.
English
should be sorted for
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK