Advertisement
Advertisement
Table of Contents
Related Manuals for Ryobi R18AG4115
Summary of Contents for Ryobi R18AG4115
- Page 1 ORIGINAL INSTRUCTIONS Cordless Angle Grinder R18AG4115...
- Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
- Page 3 Safety operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b) Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in will reduce personal injuries.
-
Page 4: Special Safety Rules
Safety are less likely to bind and are easier to control. polishing are not recommended to be performed with this power tool. Operations for which the power g) Use the power tool, accessories and tool bits tool was not designed may create a hazard and cause etc, in accordance with these instructions, personal injury. -
Page 5: Additional Safety Warnings Specific For Abrasive Cutting-Off Operations
Safety If you lose control, the cord may be cut or snagged operation, is moving away from your body, the possible and your hand or arm may be pulled into the spinning kickback may propel the spinning wheel and the power accessory. -
Page 6: Intended Use
Safety edges, etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a Wear ear protection tendency to snag the rotating accessory and cause loss of control or kickback. ■ Do not attach a saw chain woodcarving blade or Wear eye protection toothed saw blade. - Page 7 Unpacking...
- Page 8 Getting started...
- Page 9 Getting started 15˚...
- Page 10 Getting started...
-
Page 11: Operation
Operation... - Page 12 Operation...
-
Page 13: Maintenance
Maintenance... -
Page 14: Product Specifications
PRODUCT SPECIFICATIONS BATTERY AND CHARGER Voltage 18 V Compatible battery Compatible charger pack (not included) (not included) No load speed 7,500 min Lithium-Ion BPL-1820 BCL14181H Spindle thread BPL-1815 BCL14183H BPL-18202PK BCL1418 Grinding wheel capacity 115 mm RB18L13 BCS618 RB18L15 BCS618G Weight 2.15 kg RB18L26... - Page 15 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand...