Table of Contents
Advertisement
increase in vibration levels.
■ Select, maintain and replace the consumable/inserted
tool as recommended in the instruction handbook, to
prevent an unnecessary increase in vibration levels.
■ Support the weight of the tool in a stand, tensioner or
balancer if possible.
■ Hold the tool with a light but safe grip, taking account
of the required hand reaction forces, because the risk
from vibration is generally greater when the grip force
is higher.
■ An improperly mounted or damaged inserted tool can
cause excessive vibration levels.
ADDItIONAL sAfEty INstRUctIONs fOR pNEU-
MAtIc pOWER tOOLs
■ Air under pressure can cause severe injury.
■ Always shut off air supply, drain hose of air pressure
and disconnect tool from air supply when not in use,
before changing accessories or when making repairs.
■ Never direct air at yourself or anyone else.
■ Whipping hoses can cause severe injury. Always
check for damaged or loose hoses and fittings.
■ Whenever universal twist couplings (claw couplings)
are used, lock pins shall be installed and whip check
safety cables shall be used to safeguard against
possible hose-to-tool connection failure.
■ Do not exceed the maximum air pressure stated on
the tool.
■ Never carry an air tool by the hose.
syMBOLs
Safety alert
CE conformity
Please read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
Lubricate with air tool oil daily.
spEcIfIcAtIONs
Grinder cap
No-load speed
Air consumption
Maximum working pressure
Air inlet size
Air hose ID
Weight
A weighted sound pressure level 86.1dB(A), k=3dB
Sound power level
Vibration value
Uncertainty
Noise
emission
values
EN ISO 4871 and EN ISO 15744.
Vibration emission values are in accordance with
EN12096 and EN28662-1.
AppLIcAtION
The product is ideal for light weld grinding, porting and
polishing applications. The durable and lightweight
composite housing design also helps reduce vibration.
It has a lever lock throttle for safety. Any other use is
forbidden.
The product can be used for all kinds of mold, metal
products and handicrafts, the manufacturing of circuit
boards, blank finishing and grinding finishing.
The product is great for high speed grinding, porting,
smoothing, general polishing and deburring.
The composite-material housing is lightweight and easy
to use.
REsIDUAL RIsks
Even if you are operating this product in accordance
with all the safety requirements, potential risks of injury
and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration and noise
emission if the product is being used over long periods
of time or not adequately managed and properly
maintained.
2. Injuries and damage to property due to broken cutting
attachments or the sudden impact of hidden objects
during use.
3
6.35 mm (1/4")
23,000/min
128.5 L/min (4.5 cfm)
6.3 bar (90 psi)
6.35 mm (1/4")
9.52 mm (3/8")
0.54 kg
97.1dB(A), k=3dB
2.9 m/s
2
1.1 m/s
2
are
in
accordance
with
Advertisement
Table of Contents
