electric shock. IMPORTANT! PERSONAL SAFETY It is essential that you read the instructions in this manual ■ Stay alert, watch what you are doing and use common before assembling, operating, and maintaining the product. sense when operating a power tool. Do not use a power Subject to technical modification.
Never sand more than one workpiece at a time. Do not stack more than one workpiece on the machine base at a time. For greater safety and reliability, all repairs should be performed by an Authorised RYOBI Service Centre. ■ Do not sand with the workpiece unsupported. Do not sand pieces of material that are too small to be safely supported.
Page 4
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements. Please read the instructions carefully before starting the machine. Wear ear protection Wear eye protection No hands symbol Size of sanding belt Size of sanding pad Size of work table Do not dispose of waste electrical and electronic equipment as unsorted municipal waste.
Page 6
Sanding stopper Sanding belt Tracking control knob Belt tension lever Sanding pad On/off switch Work table Mitre guide Mitre scale Mitre angle adjustment knob Bevel scale Table bevel angle adjustment knob Dust port Know your product...
Belt / Disc Sander been measured in accordance with a standard test method, and may be used for comparing one tool with another. Model RBDS4601G The declared noise value(s) may also be used in a preliminary Belt size 100 mm x 914 mm assessment of exposure.
Page 20
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 20220321v4...
Need help?
Do you have a question about the RBDS4601G and is the answer not in the manual?
Questions and answers