Table of Contents
Advertisement
3
MasterBus
About MasterBus
3.1
All devices that are compatible with MasterBus are marked with the MasterBus symbol.
MasterBus is a CAN based, fully decentralized data network for communication between
Mastervolt devices. MasterBus is used as power management system for all connected
equipment, such as the inverter, battery charger, generator and many more.
Every device that is compatible with MasterBus is equipped with two data ports. The devices are
simply chained together, forming a local data network. Monitoring panels such as the EasyView 5
can be used for monitoring and control of all connected MasterBus equipment.
CAUTION:
Never connect a non-MasterBus device to the MasterBus network directly! This will void
warranty of all MasterBus devices connected.
Event based commands
3.2
With MasterBus a device can be programmed to initiate an action at another connected device. This
is done by means of event-based commands. See section 6.7 on page 22.
EasyView 5 - User and Installation Manual
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EasyView 5 and is the answer not in the manual?