Auxiliary Window Keys - Garmin G1000 Series Pilot's Manual

AUXILIARY WINDOW KEYS

The main keys which are used in association with PFD
Auxiliary Window operations are listed below:
1 DIRECT-TO – Activates the direct-to func-
tion and allows the user to enter a destination
waypoint and establishes a direct course to the
selected destination (specified by identifier chosen
from the active route)
FPL – Displays the active Flight Plan Page
2
for creating and editing the active flight plan or
accessing stored flight plans
CLR – Erases information, cancels an entry, or
3
removes page menus
4 MENU – Displays a context-sensitive list of
options
This option list allows the user to access addi-
tional features or make setting changes which
relate to certain pages.
The MENU key opens the PFD Setup Menu if no
Auxiliary Window is open.
190-00592-00 Rev. A
Figure 2-43 PFD Auxiliary Window Keys
Garmin G1000 Pilot's Guide for the Diamond DA40
PRIMARY FLIGHT DISPLAY
5 PROC – Selects approaches, departures and
arrivals for the flight plan.
When using a flight plan, available procedures
for departure and/or arrival airport are offered
automatically. If a flight plan is not used, the
desired airport, then the desired procedure may
be selected. This key selects IFR departure
procedures (SIDs), arrival procedures (STARs) and
approaches (SIAPs) from the database and loads
them into the active flight plan.
6 ENT – Accepts a menu selection or data entry
This key is used to approve an operation or
complete data entry. It is also used to confirm
information.
1
2
3
4
5
6
2-27