Secure Digital Cards - Garmin G1000 Series Pilot's Manual

SYSTEM OVERVIEW
CLR Key (DFLT MAP) – Erases information, cancels
13
an entry, or removes page menus
To immediately display the Navigation Map Page, press
and hold the CLR key (MFD only).
Dual FMS (Flight Management System) Knobs
14
– Used to select the page to be viewed (only on the
MFD)
The large knob selects a page group (MAP, WPT, AUX,
NRST) while the small knob selects a specific page
within the page group. Pressing the small knob turns
the selection cursor ON and OFF. When the cursor
is ON, data may be entered in the different windows
using a combination of the small and large knobs.
The large knob is used to move the cursor on the
page, while the small knob is used to select individual
characters for the highlighted cursor location. When
the G1000 displays a list of information that is too
long for the display screen, a scroll bar appears along
the right side of the display to indicate the availability
of additional items within the selected category. Press
the FMS/PUSH CRSR knob to activate the cursor and
turn the large knob to scroll through the list.
15 MENU Key – Displays a context-sensitive list of
options
This option list allows the user to access additional
features or to make setting changes that relate to
certain pages.
16 PROC Key – Selects approaches, departures and
arrivals from the flight plan
When using a flight plan, available procedures for
the departure and/or arrival airport are automatically
suggested. If a flight plan is not used, the desired air-
port and the desired procedure may be selected. This
key selects IFR departure procedures (DPs), arrival
1-8
17
18
3) use Secure Digital (SD) cards. SD cards are used for
aviation database updates and terrain database storage.
Garmin G1000 Pilot's Guide for the Diamond DA40
procedures (STARs) and approaches (IAPs) from the
database and loads them into the active flight plan.
ENT Key – Accepts a menu selection or data entry
This key is used to approve an operation or to com-
plete data entry. It is also used to confirm selections
and information entries.
Dual ALT (Altitude Select) Knob – Sets the Selected
Altitude in the box above the Altimeter
The large knob selects the thousands, while the small
knob selects the hundreds.

1.4 SECURE DIGITAL CARDS

NOTE: Refer to the Appendices for instructions
on updating the aviation database.
The GDU 1040 data card slots (see
To install an SD card:
Insert the SD card in the SD card slot located
on the right side of the display bezel (the front
of the card should be flush with the face of the
display bezel).
To remove an SD card:
Gently press on the SD card to release the
spring latch and eject the card.
7 on Figure 1-
190-00592-00 Rev. A