Modifying User Waypoints - Garmin G1000 Series Pilot's Manual

MULTI FUNCTION DISPLAY

MODIFYING USER WAYPOINTS

To modify an existing waypoint, select that waypoint
on the User Waypoint Information Page and enter the new
position information directly over the old information.
To modify a user waypoint by changing its
latitude/longitude position:
1. With the User Waypoint Information Page
displayed, press the FMS knob to activate the
cursor.
2. Turn the small and large FMS knobs to enter
a name for the new waypoint and press the
ENT key. The message 'Are you sure you want
to create the new user waypoint' is displayed.
Press 'YES' to create the new waypoint.The first
reference waypoint (REFERENCE WAYPOINT)
field is highlighted.
Turn the large FMS knob to highlight the posi-
3.
tion field in the Information Box.
4. Turn the small and large FMS knobs to enter
the new position coordinates and press the
ENT key to accept the selected position.
5. Press the FMS knob to remove the flashing
cursor.
7-80 Garmin G1000 Pilot's Guide for the Diamond DA40
To modify a user waypoint by changing
reference waypoint information:
1. With the User Waypoint Information Page
displayed, press the FMS knob to activate the
cursor.
2. Turn the small and large FMS knobs to enter
a name for the new waypoint and press the
ENT key. The message 'Are you sure you want
to create the new user waypoint' is displayed.
Press 'YES' to create the new waypoint.The first
reference waypoint (REFERENCE WAYPOINT)
field is highlighted if you want to change the
reference waypoint. Otherwise, continue turn-
ing the large FMS knob to highlight the radial
(RAD) or distance (DIS) field, as desired.
Turn the small and large FMS knobs to change
3.
the identifier of the reference waypoint.The ref-
erence waypoint can be an airport, VOR, NDB,
intersection or another user waypoint. Press
the ENT key to accept the selected identifier.
4. The cursor moves to the radial (RAD) field. Use
the small and large FMS knobs to change the
radial from the reference waypoint, if desired.
Press ENT to accept the selected radial.
5. The cursor moves to the distance (DIS) field.
Turn the small and large FMS knobs to change
the distance from the reference waypoint to
the new user waypoint, if desired. Press the
ENT key to accept the selected distance.
6. Press the FMS knob to remove the flashing
cursor.
190-00592-00 Rev. A